Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
TLV2472CDIC CMOS 2 CIRCUIT 8SOIC |
525 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.5V/µs | 2.8 MHz | - | 2.5 pA | 250 µV | 600µA (x2 Channels) | 35 mA | 2.7 V | 6 V | 0°C ~ 70°C (TA) | - | - | Surface Mount | 8-SOIC |
|
OPA2345EA/250IC CMOS 2 CIRCUIT 8VSSOP |
368 | - |
|
Datasheet | MicroAmplifier™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 2V/µs | 3 MHz | - | 0.2 pA | 200 µV | 150µA (x2 Channels) | 15 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
UPC824G2-E1-ALINEAR IC |
2,500 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
BD14215FVJ-LAE2CURRENT SENSE AMPLIFIER: THE BD1 |
2,484 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 2 | Push-Pull | - | - | - | 1 µA | 600 µV | 310µA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-TSSOP-BJ |
|
|
UPC824G2-E2-ALINEAR IC |
1,850 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
TSB952IQ2THIGH BANDWIDTH (52 MHZ), RAIL-TO |
3,000 | - |
|
Datasheet | - | 8-WDFN Exposed Pad | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 30V/µs | 52 MHz | - | 6 pA | 3 mV | 2.6mA (x2 Channels) | 46 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
TP5531U-TRIC CHOPPER 1 CIRCUIT SOT-23-5 |
2,975 | - |
|
Datasheet | TP553x | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 1 | Single Ended, Rail-to-Rail | 0.16V/µs | 350 kHz | - | 50 pA | 1 µV | 45µA | 60 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
TSB952IDTSO 08 .15 JEDEC |
2,464 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Standard | 2 | Single Ended, Rail-to-Rail | 30V/µs | 52 MHz | - | 6 pA | 3 mV | 2.6mA (x2 Channels) | 46 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
TLR377GYZ-E2ULTRA SMALL PACKAGE & HIGH PRECI |
3,925 | - |
|
Datasheet | - | 6-XFBGA, WLCSP | Tape & Reel (TR) | Active | Standard | 1 | Push-Pull, Rail-to-Rail | 2V/µs | 4 MHz | - | 0.5 pA | 100 µV | 585µA | 25 mA | 1.8 V | 5.5 V | -20°C ~ 85°C | - | - | Surface Mount | 6-WLCSP (0.88x0.58) |
|
|
TPA5521-S5TRIC CHOPPER 1 CIRCUIT SOT-23-5 |
3,000 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 1 | Push-Pull, Rail-to-Rail | 20V/ms | 78 kHz | - | 50 pA | 0.83 mV | 9.8µA | 22 mA | 1.7 V | 3.6 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
|
TPA5562-VS1RIC CHOPPER 2 CIRCUIT 8-MSOP |
3,000 | - |
|
Datasheet | TPA556x | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 2 | Push-Pull, Rail-to-Rail | 4.7V/µs | 3.5 MHz | - | 200 pA | 10 µV | 500µA (x2 Channels) | 60 mA | 2.7 V | 5.5 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 8-MSOP |
|
|
TLR377HFV-LBTRTLR SERIES, HIGH PRECISION AND I |
2,962 | - |
|
Datasheet | - | SOT-665 | Tape & Reel (TR) | Active | CMOS | 1 | Push-Pull, Rail-to-Rail | 2V/µs | 4 MHz | - | 0.5 pA | 1.7 µV | 585µA | 50 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 5-HVSOF |
|
MCP653T-E/CHYIC OPAMP GP 1 CIRCUIT SOT23-6 |
2,565 | - |
|
Datasheet | mCal Technology | SOT-23-6 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 30V/µs | 50 MHz | - | 6 pA | 200 µV | 6mA | 100 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
|
UPC4744G2-E1-ALINEAR IC |
2,500 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC4744G2-E2-ALINEAR IC |
2,497 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
REA1601GSM#HC0LINEAR IC |
2,000 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC4744GR-9LG-E1-ALINEAR IC |
1,885 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
UPC844GR-9LG-E2-ALINEAR IC |
2,270 | - |
|
Datasheet | * | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
TLV2375IDRIC OPAMP GP 4 CIRCUIT 16SOIC |
2,500 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 2.1V/µs | 3 MHz | - | 1 pA | 2 mV | 750µA (x4 Channels) | 16 mA | 2.7 V | 16 V | -40°C ~ 125°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
TLC072QDRQ1IC OPAMP GP 2 CIRCUIT 8SOIC |
2,490 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | - | 19V/µs | 10 MHz | - | 1.5 pA | 390 µV | 2.1mA (x2 Channels) | 57 mA | 4.5 V | 16 V | -40°C ~ 125°C | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
