Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NCV81342DBATXGNCV81342 MID1 SKU |
1,000 | - |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MAX4805ACTJ+IC OPAMP GP 8 CIRCUIT 32TQFN |
1,565 | - |
|
Datasheet | - | 32-WFQFN Exposed Pad | Tray | Active | General Purpose | 8 | - | - | - | 44 MHz | - | - | - | - | 1.95 V | 5.1 V | 0°C ~ 70°C | - | - | Surface Mount | 32-TQFN (5x5) |
|
JM38510/11405BGAIC OPAMP JFET 1 CIRCUIT TO99-8 |
100 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 10V/µs | - | - | 100 pA | 2 mV | - | 50 mA | 10 V | 40 V | -55°C ~ 125°C | Military | MIL-M-38510/114 | Through Hole | TO-99-8 |
|
OPA404BGIC OPAMP GP 4 CIRCUIT 14CDIP |
2,842 | - |
|
Datasheet | Difet® | 14-CDIP (0.300", 7.62mm) | Bulk | Not For New Designs | General Purpose | 4 | - | 35V/µs | 6.4 MHz | - | 1 pA | 260 µV | 9mA (x4 Channels) | 10 mA | 10 V | 36 V | -25°C ~ 85°C | - | - | Through Hole | 14-CDIP |
|
|
OPA404SGIC OPAMP GP 4 CIRCUIT 14CDIP |
3,077 | - |
|
Datasheet | Difet® | 14-CDIP (0.300", 7.62mm) | Bulk | Not For New Designs | General Purpose | 4 | - | 35V/µs | 6.4 MHz | - | 1 pA | 260 µV | 9mA (x4 Channels) | 10 mA | 10 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 14-CDIP |
|
JM38510/11405BPAIC OPAMP JFET 1 CIRCUIT 8CERDIP |
4,142 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 3V/µs | 5 kHz | - | 3.5 nA | 2 mV | - | 50 mA | 10 V | 40 V | -55°C ~ 125°C | Military | MIL-M-38510/114 | Through Hole | 8-CERDIP |
|
|
LM108AH/883OP AMPS |
4,515 | - |
|
Datasheet | - | TO-99-8 Metal Can | Tray | Active | General Purpose | 1 | Push-Pull | - | - | - | 500 pA | 700 µV | 300µA | - | 4 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99 |
|
AD582SD/883BIC SAMPL/HOLD 1 CIRCUIT 14CDIP |
1,049 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Tube | Active | Sample and Hold | 1 | - | 3V/µs | - | 1.5 MHz | 1.5 µA | 2 mV | 3mA | 25 mA | 18 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 14-CDIP |
|
AD684SQ/883BIC SAMPL/HOLD 4 CIRCUIT 16CERDIP |
2,703 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Sample and Hold | 4 | - | - | - | 4 MHz | 100 nA | - | 18mA | 5 mA | 21.6 V | 26.4 V | -55°C ~ 125°C | - | - | Through Hole | 16-CERDIP |
|
AD640TD/883BIC LOGARITHMIC 1 CIRCUIT 20CDIP |
1,365 | - |
|
Datasheet | - | 20-CDIP (0.300", 7.62mm) | Tube | Active | Logarithmic | 1 | - | - | - | 350 MHz | 7 µA | 50 µV | 35mA | 2.3 mA | 9 V | 15 V | -55°C ~ 125°C | - | - | Through Hole | 20-CDIP |
|
OP467ARC/883CIC OPAMP GP 4 CIRCUIT 20CLCC |
1,719 | - |
|
Datasheet | - | 20-CLCC | Tube | Active | General Purpose | 4 | - | 350V/µs | 28 MHz | - | 150 nA | 200 µV | 8mA (x4 Channels) | - | 9 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
|
OP284CHIPSDIE |
3,500 | - |
|
Datasheet | - | Die | Tray | Active | General Purpose | 2 | Rail-to-Rail | 4V/µs | 4.25 MHz | - | - | - | - | 10 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | Die |
|
|
OP27-001CDIE ON FILM FRAME |
3,345 | - |
|
Datasheet | - | Die | Bulk | Active | General Purpose | 1 | Push-Pull | 2.8V/µs | 8 MHz | - | - | - | - | - | - | 44 V | - | Military | MIL-STD-883 | Surface Mount | Die |
|
|
OP77-001CDIE ON FILM FRAME |
1,222 | - |
|
Datasheet | - | Die | Bulk | Active | General Purpose | 1 | Push-Pull | - | - | 600 kHz | - | - | - | - | 6 V | 44 V | -25°C ~ 85°C | - | - | Surface Mount | Die |
|
|
TND735-H-TL-HAMP IC FOR ECM |
180,000 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
KA358STUIC OPAMP GP 2 CIRCUIT 9SIP |
45,595 | - |
|
Datasheet | - | 10-SSIP Module, 9 Leads, Formed Leads | Tube | Obsolete | General Purpose | 2 | - | - | - | - | 45 nA | 2.9 mV | 800µA | 30 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Through Hole | 9-SIP |
|
LM358DGIC OPAMP GP 2 CIRCUIT 8SOIC |
3,079 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 2 | - | - | 1 MHz | - | 45 nA | 2 mV | 800µA (x2 Channels) | 40 mA | 3 V | 32 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
LM2902NS-MANDIC OPAMP GP 4 CIRCUIT 14SO |
39,007 | - |
|
Datasheet | - | 14-SOIC (0.209", 5.30mm Width) | Bulk | Obsolete | General Purpose | 4 | - | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-SO |
|
LM2904PS-MANDIC OPAMP GP 2 CIRCUIT 8SO |
34,485 | - |
|
Datasheet | - | 8-SOIC (0.209", 5.30mm Width) | Bulk | Obsolete | General Purpose | 2 | - | 0.3V/µs | 700 kHz | - | 20 nA | 3 mV | 500µA (x2 Channels) | 40 mA | 3 V | 26 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-SO |
|
|
TY30486DUAL DIF.INPUT OP AMP |
19,800 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
