Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ALD1732PALIC OPAMP GP 1 CIRCUIT 8DIP |
3,606 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 2.1V/µs | 1.5 MHz | - | 10 pA | 100 µV | - | - | 4 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
ALD1704ASALIC OPAMP GP 1 CIRCUIT 8SOIC |
3,367 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 5V/µs | 2.1 MHz | - | 1 pA | 900 µV | 3mA | 15 mA | 6.5 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD1722GPALIC OPAMP GP 1 CIRCUIT 8DIP |
4,591 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 2.8V/µs | 1.7 MHz | - | 0.01 pA | 80 µV | 800µA | 8 mA | 4 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
ALD1726GPALIC OPAMP GP 1 CIRCUIT 8DIP |
4,008 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.17V/µs | 400 kHz | - | 0.01 pA | 150 µV | 25µA | 200 µA | 2 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
ALD2731SALIC CMOS 2 CIRCUIT 8SOIC |
1,393 | - |
|
Datasheet | EPAD® | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.7V/µs | 700 kHz | - | 0.01 pA | 1 mV | 240µA (x2 Channels) | 1 mA | 2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD2732SALIC OPAMP GP 2 CIRCUIT 8SOIC |
2,504 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1.9V/µs | 1.5 MHz | - | 10 pA | 2 mV | - | - | 4 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD1721ESALIC OPAMP GP 1 CIRCUIT 8SOIC |
3,341 | - |
|
Datasheet | EPAD® | 8-SOIC (0.154", 3.90mm Width) | Tube | Not For New Designs | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 0.01 pA | 35 µV | 120µA | 1 mA | 2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
ALD1722EPAIC OPAMP GP 1 CIRCUIT 8DIP |
4,192 | - |
|
Datasheet | EPAD® | 8-DIP (0.300", 7.62mm) | Tube | Not For New Designs | General Purpose | 1 | Rail-to-Rail | 2.1V/µs | 1.7 MHz | - | 10 nA | 25 µV | 800µA | 8 mA | 4 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
ALD1701BPALIC OPAMP GP 1 CIRCUIT 8DIP |
1,789 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 1V/µs | 1 MHz | - | 1 pA | 2 mV | 120µA | 1 mA | 2 V | 12 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
ALD2706SALIC CMOS 2 CIRCUIT 8SOIC |
4,438 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 0.1V/µs | 200 kHz | - | 0.1 pA | 10 mV | 50µA (x2 Channels) | 200 µA | 2 V | 10 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
