Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4202EUKLOW-POWER, OPEN-LOOP BUFFER |
1,243 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | Buffer | 1 | - | 4200V/µs | - | 780 MHz | 800 nA | 1 mV | 2.2mA | 44 mA | 8 V | 11 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
ICL7650CPAIC OPAMP ZER-DRIFT 1CIRC 8DIP |
4,310 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 2.5V/µs | 2 MHz | - | 1.5 pA | 700 µV | 1.2mA | - | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LA47201L-N-EFOUR CHANNEL BTL POWER AMPLIFIER |
300 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
AD623BNIC AMP INST R-R LP 8DIP |
5,211 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | Rail-to-Rail | 0.3V/µs | - | 800 kHz | 17 nA | 25 µV | 375µA | - | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AD8099ACP-R2IC OPAMP VF ULN ULDIST 8LFCSP |
4,588 | - |
|
Datasheet | - | 8-VFDFN Exposed Pad, CSP | Cut Tape (CT) | Obsolete | Voltage Feedback | 1 | - | 1350V/µs | - | 510 MHz | 6 µA | 100 µV | 15mA | 178 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP (3x3) |
|
MAX479CPD+IC OPAMP SNGL SUP QUAD 14-DIP |
458 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Discontinued at Digi-Key | General Purpose | 4 | - | 0.04V/µs | 85 kHz | - | 3 nA | 50 µV | 13µA (x4 Channels) | - | 3 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
AD548AQIC OPAMP GP 1 CIRCUIT 8CERDIP |
22,556 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.8V/µs | 1 MHz | - | - | - | 170µA | 15 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
UC3178QPIC POWER 2 CIRCUIT 28PLCC |
1,011 | - |
|
Datasheet | - | 28-LCC (J-Lead) | Tube | Obsolete | Power | 2 | - | 1V/µs | 2 MHz | - | 50 µA | 12 mV | 13mA (x2 Channels) | 450 mA | 3 V | 15 V | 0°C ~ 70°C | - | - | Surface Mount | 28-PLCC (11.51x11.51) |
|
PM156J/883CIC OPAMP JFET 1 CIRCUIT TO99-8 |
448 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 12V/µs | 5 MHz | - | 30 nA | 1 mV | 2mA | 50 mA | 44 V | 44 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | TO-99-8 |
|
|
CA30063RF/MICROWAVE LIMITING AMPLIFIER |
113 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
AD848JRIC OPAMP GP 1 CIRCUIT 8SOIC |
2,289 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 300V/µs | 175 MHz | - | 3.3 µA | 200 µV | 5.1mA | 32 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
TLC25L4BCDIC CMOS 4 CIRCUIT 14SOIC |
3,412 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 4 | Single-Ended | 0.04V/µs | 110 kHz | - | 0.2 pA | 340 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
AD8002ARMIC OPAMP CF DUAL LP LDIST 8MSOP |
5,876 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 1200V/µs | - | 600 MHz | 5 µA | 2 mV | 10mA (x2 Channels) | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
TLC254BCDIC CMOS 4 CIRCUIT 14SOIC |
1,196 | - |
|
Datasheet | LinCMOS™ | 14-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | CMOS | 4 | Open Drain | 4.5V/µs | 2.2 MHz | - | 0.2 pA | 340 µV | 2.7mA (x4 Channels) | - | 1.4 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
OP43BJIC OPAMP JFET 1 CIRCUIT TO99-8 |
1,087 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | 10 V | 40 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
|
LA47201L-NCARAUDIO AMPLIFIER BTL4CH |
300 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
EL2227CSZIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
223 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Voltage Feedback | 2 | - | 50V/µs | 137 MHz | 115 MHz | 3.4 µA | 200 µV | 4.8mA (x2 Channels) | 180 mA | 5 V | 24 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8220WARMZ-RLIC INST AMP 1 CIRCUIT 8MSOP |
2,742 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 2V/µs | - | 1.5 MHz | 25 pA | 250 µV | 750µA | 15 mA | 4.5 V | 36 V | -40°C ~ 125°C | Automotive | - | Surface Mount | 8-MSOP |
|
TLV2765IPWRIC OPAMP GP 4 CIRCUIT 16TSSOP |
1,122 | - |
|
Datasheet | - | 16-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.23V/µs | 500 kHz | - | 3 pA | 550 µV | 20µA (x4 Channels) | 10.2 mA | 1.8 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-TSSOP |
|
HFA1412IPIC BUFFER 4 CIRCUIT 14DIP |
154 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Buffer | 4 | - | 1700V/µs | - | 350 MHz | 1 µA | 2 mV | 5.9mA | 55 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
