Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
5962-89804012AIC OPAMP JFET 1 CIRCUIT 20CLCC |
1,269 | - |
|
Datasheet | - | 20-CLCC | Bulk | Active | J-FET | 1 | - | 120V/µs | 23 MHz | - | 80 pA | 300 µV | 6.5mA | - | 16 V | 40 V | -55°C ~ 125°C | - | - | Surface Mount | 20-CLCC (9x9) |
|
AD604ARIC VARIABLE GAIN 2 CIRC 24SOIC |
2,693 | - |
|
Datasheet | X-AMP® | 24-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Variable Gain | 2 | - | 170V/µs | - | 40 MHz | 400 nA | 30 mV | 32mA | 40 mA | 5 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
|
AD604AR-REELIC VARIABLE GAIN 2 CIRC 24SOIC |
3,353 | - |
|
Datasheet | X-AMP® | 24-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | Variable Gain | 2 | - | 170V/µs | - | 40 MHz | 400 nA | 30 mV | 32mA | 40 mA | 5 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
JM38510/11402BGAIC OPAMP JFET 1 CIRCUIT TO99-8 |
706 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 7.5V/µs | 5 MHz | - | 60 nA | 7 mV | - | 50 mA | 10 V | 40 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
CA3078EMICROPOWER OP AMP 700 NW |
9,914 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 1.5V/µs | 2 MHz | - | 60 nA | 1.3 mV | 100µA | 12 mA | 1.5 V | 12 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
CA3078AEMICROPOWER OP AMP |
7,880 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | - | 1.5V/µs | 2 MHz | - | 7 nA | 700 µV | 20µA | 12 mA | 1.5 V | 30 V | -55°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
TLE2072AMJGBIC OPAMP JFET 2 CIRCUIT 8CDIP |
6,280 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 45V/µs | 10 MHz | - | 20 pA | 700 µV | 3.1mA (x2 Channels) | 48 mA | 4.5 V | 38 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
|
AD510LH/+IC OPAMP GP 1 CIRCUIT TO99-8 |
254 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | - | - | - | 10 nA | 25 µV | - | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
AD602JRIC VARIABLE GAIN 2 CIRC 16SOIC |
3,686 | - |
|
Datasheet | X-AMP® | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | Variable Gain | 2 | - | 275V/µs | - | 35 MHz | 350 nA | - | 11mA (x2 Channels) | 50 mA | 9.5 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
AD600JR-REEL7IC VARIABLE GAIN 2 CIRC 16SOIC |
3,371 | - |
|
Datasheet | X-AMP® | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | Variable Gain | 2 | - | 275V/µs | - | 35 MHz | 350 nA | - | 11mA (x2 Channels) | 50 mA | 9.5 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
AD602JR-REEL7IC VARIABLE GAIN 2 CIRC 16SOIC |
4,799 | - |
|
Datasheet | X-AMP® | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | Variable Gain | 2 | - | 275V/µs | - | 35 MHz | 350 nA | - | 11mA (x2 Channels) | 50 mA | 9.5 V | 10.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
AD604ANZIC VARIABLE GAIN 2 CIRCUIT 24DIP |
4,884 | - |
|
Datasheet | X-AMP® | 24-DIP (0.300", 7.62mm) | Tube | Obsolete | Variable Gain | 2 | - | 170V/µs | - | 40 MHz | 400 nA | 30 mV | 32mA | 40 mA | 5 V | 5 V | -40°C ~ 85°C | - | - | Through Hole | 24-PDIP |
|
HA2-2650-8/R1963OPERATIONAL AMPLIFIER |
124 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
HA2-2548/883IC OPAMP GP 1 CIRCUIT TO99-8 |
141 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 80V/µs | 130 MHz | - | 50 nA | 900 µV | - | 30 mA | 30 V | 30 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
|
PM157AJ/883CIC OPAMP JFET 1 CIRCUIT TO99-8 |
328 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 45V/µs | 20 MHz | - | 30 nA | 1 mV | 5mA | - | 40 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
MAX427CPA+IC OPAMP GP 1 CIRCUIT 8DIP |
11,886 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Obsolete | General Purpose | 1 | Differential | 2.8V/µs | 8 MHz | - | 10 nA | 5 µV | - | - | 44 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
AD545AMHIC OPAMP JFET 1 CIRCUIT TO99-8 |
339 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | 10 V | 40 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
|
TLC2272AMJGBIC CMOS 2 CIRCUIT 8CDIP |
1,809 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 3.6V/µs | 2.25 MHz | - | 1 pA | 300 µV | 2.4mA (x2 Channels) | 50 mA | 4.4 V | 16 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Through Hole | 8-CDIP |
|
|
AD604ANIC AMP VGA DUAL ULN 40MA 24DIP |
1,083 | - |
|
Datasheet | X-AMP® | 24-DIP (0.300", 7.62mm) | Tube | Obsolete | Variable Gain | 2 | - | 170V/µs | - | 40 MHz | 400 nA | 30 mV | 32mA | 40 mA | 5 V | 5 V | -40°C ~ 85°C | - | - | Through Hole | 24-PDIP |
|
INA105AMIC OPAMP DIFF 1 CIRCUIT TO99-8 |
1,020 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | Differential | 1 | - | 3V/µs | - | 1 MHz | - | 50 µV | 1.5mA | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
