Instrumentation, Op Amps, Buffer Amps
Browse available Instrumentation, Op Amps, Buffer Amps part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OPA349UAOPA349 1 UA, RAIL-TO-RAIL, CMOS |
4,409 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 1 | Rail-to-Rail | 0.02V/µs | 70 kHz | - | 0.5 pA | 2 mV | 1µA | 8 mA | 1.8 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
MAX4464EUK+IC OPAMP GP 1 CIRCUIT SOT23-5 |
1,071 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.02V/µs | 40 kHz | - | 200 pA | 500 µV | 750nA | 36 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
UPC358C(5)-AIC OPAMP GP 2 CIRCUIT 8DIP |
5,940 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | Push-Pull | - | - | - | 14 nA | 2 mV | 700µA | 40 mA | 3 V | 30 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-PDIP |
|
LPV321M7LPV321-N SINGLE CHANNEL GENERAL |
94,000 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.1V/µs | 152 kHz | - | 2 nA | 1.5 mV | 9µA | 60 mA | 2.7 V | 5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
LMH6683MTXIC OP AMP 3 FUNC, PDSO14 |
7,500 | - |
|
Datasheet | LMH® | 14-TSSOP (0.173", 4.40mm Width) | Bulk | Active | Voltage Feedback | 3 | - | 940V/µs | - | 190 MHz | 5 µA | 1 mV | 6.5mA (x3 Channels) | 85 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
|
LPV511MGX/NOPBLPV511 MICROPOWER RAIL-TO-RAIL I |
3,000 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.0077V/µs | 25 kHz | - | 320 pA | 200 µV | 1.2µA | 1.3 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
TLV2241TDRTLV2241 - RRIO, SINGLE SUPPLY AM |
2,500 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LMH6658MMX/NOPBIC OPAMP VFB 2 CIRCUIT 8VSSOP |
7,000 | - |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 2 | Rail-to-Rail | 700V/µs | 140 MHz | 270 MHz | 5 µA | 1 mV | 6.5mA (x2 Channels) | 110 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
|
LMV721M7/NOPBLMV721-N SINGLE-CHANNEL 10MHZ, L |
16,712 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 5.25V/µs | 10 MHz | - | 260 nA | 80 µV | 1.03mA | - | 2.2 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
LMH6647MAX/NOPBIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
5,750 | - |
|
Datasheet | VIP10™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 1 | Push-Pull, Rail-to-Rail | 22V/µs | - | 55 MHz | 650 nA | 1 mV | 725µA | 20 mA | 2.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD45257ACPZ-R7Dual High Current Operational Am |
9,000 | - |
|
Datasheet | - | - | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LHV720MAX/NOPBLHV720MA - OPERATIONAL AMPLIFIER |
10,000 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LMV951MK/NOPBLMV951 1V, 2.7 MHZ, RAIL-TO-RAIL |
2,000 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.4V/µs | 2.8 MHz | - | 36 nA | 1.5 mV | 570µA | 85 mA | 0.9 V | 3 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-THIN |
|
LMP2011MAX/NOPBLMP2011 - OPERATIONAL AMPLIFIER, |
2,300 | - |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 3 MHz | - | 3 pA | 0.12 µV | 930µA | 17 mA | 2.7 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
OPA347UAOPA347 MICROPOWER RAIL-TO-RAIL O |
12,868 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.17V/µs | 350 kHz | - | 0.5 pA | 2 mV | 20µA | 17 mA | 2.3 V | 5.5 V | -55°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OPA137NA/3KOPA137 LOW COST FET-INPUT OPERAT |
8,471 | - |
|
Datasheet | MicroAmplifier™ | SC-74A, SOT-753 | Bulk | Active | J-FET | 1 | - | 3.5V/µs | 1 MHz | - | 5 pA | 2.5 mV | 220µA | 60 mA | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
LMH6601MGX/NOPBIC OPAMP VFB 1 CIRCUIT SC70-6 |
12,081 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Bulk | Active | Voltage Feedback | 1 | Rail-to-Rail | 275V/µs | 155 MHz | 250 MHz | 5 pA | 1 mV | 9.6mA | 180 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-6 |
|
|
EL5120N6EEL5120 - 2MHZ RAIL-TO-RAIL INPUT |
3,950 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
LME49723MA/NOPBLME49723 DUAL HIGH FIDELITY AUDI |
350 | - |
|
Datasheet | LME® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Audio | 2 | - | 8V/µs | 19 MHz | 4 MHz | 200 nA | 300 µV | 6.7mA (x2 Channels) | 25 mA | 5 V | 34 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-SOIC |
|
ISL28194FHZ-T7OPERATIONAL AMPLIFIER, 1 FUNC, 2 |
379 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.0012V/µs | 3.5 kHz | - | 15 pA | 100 µV | 330nA | 12 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 6-SOT |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about selecting, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components through Winsun (HK) Electronics.
What should I check when selecting Instrumentation, Op Amps, Buffer Amps components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Instrumentation, Op Amps, Buffer Amps part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Instrumentation, Op Amps, Buffer Amps parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Instrumentation, Op Amps, Buffer Amps components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
