Flip Flops
Use the filters and product table below to compare Flip Flops components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MC74F174DR2FLIP FLOP D TYPE BUS INTERFACE P |
12,500 | - |
|
Datasheet | - | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MC74HC175DIC FF D-TYPE SNGL 4BIT 16SOIC |
7,629 | - |
|
Datasheet | 74HC | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Master Reset | D-Type | Complementary | 1 | 4 | 35 MHz | 22ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 4 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 16-SOIC |
|
SN74LS74AML1IC FLIP FLOP D-TYPE |
6,000 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MC74HC74AFR2IC FF D-TYPE DUAL 1BIT 14SOEIAJ |
6,000 | - |
|
Datasheet | 74HC | 14-SOIC (0.209", 5.30mm Width) | Bulk | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 35 MHz | 17ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 2 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-SOIC |
|
MC74ACT74ML1IC FF D-TYPE DUAL 1BIT 14SOEIAJ |
5,695 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
MC74AC74ML1D FLIP-FLOP |
4,000 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
74VHC74MTCIC FF D-TYPE DUAL 1BIT 14TSSOP |
1,103 | - |
|
Datasheet | 74VHC | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 115 MHz | 9.3ns @ 5V, 50pF | Positive Edge | 8mA, 8mA | 2V ~ 5.5V | 2 µA | 4 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-TSSOP |
|
|
NLV17SZ74USG-22523ZIC FF D-TYPE SNGL 1BIT US8 |
1,268 | - |
|
Datasheet | 17SZ | 8-VFSOP (0.091", 2.30mm Width) | Tape & Reel (TR) | Obsolete | Set(Preset) and Reset | D-Type | Complementary | 1 | 1 | 200 MHz | 5ns @ 5V, 50pF | Positive Edge | 32mA, 32mA | 1.65V ~ 5.5V | 1 µA | 2.5 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | US8 |
|
MC74F109NJ-K FLIP-FLOP, F/FAST SERIES, 2 |
27,500 | - |
|
Datasheet | 74F | 16-DIP (0.300", 7.62mm) | Bulk | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 125 MHz | 8ns @ 5V, 50pF | Positive Edge | 1mA, 20mA | 4.5V ~ 5.5V | 17 mA | - | 0°C ~ 70°C (TA) | - | - | Through Hole | 16-PDIP |
|
|
MC74AC74MIC D-TYPE POS TRG DUAL 14SOEIAJ |
10,070 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Flip Flops FAQ
Common questions about filtering, comparing and sourcing Flip Flops components.
How can I narrow the Flip Flops selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Flip Flops part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
