Flip Flops
Use the filters and product table below to compare Flip Flops components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SN74ABT574ANSOCTAL EDGE-TRIGGERED D-TYPE FLIP |
2,069 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
SN74LVTH273NSIC FF D-TYPE SNGL 8BIT 20SO |
10,920 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
CD74AC374MIC FF D-TYPE SNGL 8BIT 20SOIC |
5,834 | - |
|
Datasheet | 74AC | 20-SOIC (0.295", 7.50mm Width) | Bulk | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 125 MHz | 10.8ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 1.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-SOIC |
|
SN74ALS74ANSD FLIP-FLOP, ALS SERIES, 2-FUNC, |
3,700 | - |
|
Datasheet | 74ALS | 14-SOIC (0.209", 5.30mm Width) | Bulk | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 34 MHz | 18ns @ 5V, 50pF | Positive Edge | 8mA, 2mA | 4.5V ~ 5.5V | 4 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SO |
|
CD74AC174MCD74AC174 HEX D-TYPE FLIP-FLOPS |
1,094 | - |
|
Datasheet | 74AC | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Master Reset | D-Type | Non-Inverted | 1 | 6 | 95 MHz | 13.5ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 1.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
SN74ALS374ANSD-TYPE POS TRG SNGL 20SO |
2,600 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
CD74HC109MCD74HC109 HIGH SPEED CMOS LOGIC |
1,530 | - |
|
Datasheet | 74HC | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 60 MHz | 30ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 4 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
CD74HC377MCD74HC377 HIGH SPEED CMOS LOGIC |
1,146 | - |
|
Datasheet | 74HC | 20-SOIC (0.295", 7.50mm Width) | Bulk | Active | Standard | D-Type | Non-Inverted | 1 | 8 | 60 MHz | 30ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-SOIC |
|
SN74LVTH374DBIC FF D-TYPE SNGL 8BIT 20SSOP |
16,240 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
SN74ALS273DBRFLIP FLOP D-TYPE BUS INTERFACE P |
6,000 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Flip Flops FAQ
Common questions about filtering, comparing and sourcing Flip Flops components.
How can I narrow the Flip Flops selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Flip Flops part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
