Flip Flops
Use the filters and product table below to compare Flip Flops components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SNJ54ABT823FK9-BIT BUS-INTERFACE FLIP-FLOPS W |
3,281 | - |
|
Datasheet | 54ABT | 28-CLCC | Tube | Active | Master Reset | D-Type | Tri-State, Non-Inverted | 1 | 9 | 200 MHz | 6.1ns @ 5V, 50pF | Positive Edge | 24mA, 48mA | 4.5V ~ 5.5V | 38 mA | 4 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 28-LCCC (11.43x11.43) |
|
|
CY54FCT374TDMBOCTAL D-TYPE REGISTERS WITH 3-ST |
3,007 | - |
|
Datasheet | 54FCT | 20-CDIP (0.300", 7.62mm) | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | - | 11ns @ 5V, 50pF | Positive Edge | 12mA, 32mA | 4.5V ~ 5.5V | 200 µA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
|
CD54AC273F3AOCTAL D-TYPE FLIP-FLOPS WITH RES |
4,189 | - |
|
Datasheet | 54AC | 20-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 100 MHz | 13.5ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 1.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
|
SN74HC273NSR-PIC FF D-TYPE SNGL 8BIT 20SO |
2,926 | - |
|
Datasheet | 74HC | 20-SOIC (0.209", 5.30mm Width) | Bulk | Obsolete | Master Reset | D-Type | Non-Inverted | 1 | 8 | 60 MHz | 27ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 3 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 20-SO |
|
|
CD54HCT174F3AHIGH SPEED CMOS LOGIC HEX D-TYPE |
1,065 | - |
|
Datasheet | 54HCT | 16-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 6 | 25 MHz | 40ns @ 4.5V, 50pF | Positive Edge | 4mA, 4mA | 4.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
|
CD74AC74E-NGIC FF D-TYPE DUAL 1BIT 14DIP |
3,546 | - |
|
Datasheet | 74AC | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 110 MHz | 10ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 1.5V ~ 5.5V | 4 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
|
SN74F112NSIC FF JK-TYPE DUAL 1BIT 16SO |
1,534 | - |
|
Datasheet | 74F | 16-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 130 MHz | 6.5ns @ 5V, 50pF | Negative Edge | 1mA, 20mA | 4.5V ~ 5.5V | 19 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SO |
|
|
JM38510/32501BRAOCTAL D-TYPE FLIP-FLOP WITH CLEA |
4,033 | - |
|
Datasheet | 54LS | 20-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 40 MHz | 27ns @ 5V, 15pF | Positive Edge | 400µA, 4mA | 4.5V ~ 5.5V | 27 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
|
SN74ALS534ANSIC FF D-TYPE SNGL 8BIT 20SO |
2,563 | - |
|
Datasheet | 74ALS | 20-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | Standard | D-Type | Tri-State, Inverted | 1 | 8 | 35 MHz | 16ns @ 5V, 50pF | Positive Edge | 2.6mA, 24mA | 4.5V ~ 5.5V | 31 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 20-SO |
|
|
7601301EADUAL J-K FLIP-FLOPS WITH PRESET |
3,717 | - |
|
Datasheet | 54LS | 16-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 45 MHz | 20ns @ 5V, 15pF | Negative Edge | 4mA | 4.5V ~ 5.5V | 6 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
Flip Flops FAQ
Common questions about filtering, comparing and sourcing Flip Flops components.
How can I narrow the Flip Flops selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Flip Flops part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
