Flip Flops
Use the filters and product table below to compare Flip Flops components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SN74AS175BNSIC FF D-TYPE SNGL 4BIT 16SO |
4,123 | - |
|
Datasheet | 74AS | 16-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | Master Reset | D-Type | Complementary | 1 | 4 | 100 MHz | 10ns @ 5V, 50pF | Positive Edge | 2mA, 20mA | 4.5V ~ 5.5V | 34 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SO |
|
SNJ54AC74JDUAL POSITIVE-EDGE-TRIGGERED D-T |
1,577 | - |
|
Datasheet | 54AC | 14-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 160 MHz | 10ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 2V ~ 6V | 2 µA | 3 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
|
JM38510/37101B2ADUAL POSITIVE-EDGE-TRIGGERED D-T |
2,520 | - |
|
Datasheet | 54ALS | 20-CLCC | Tube | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 25 MHz | 23ns @ 5V, 50pF | Positive Edge | 2mA, 4mA | 4.5V ~ 5.5V | 4 mA | - | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
84000012ADUAL J-K POSITIVE-EDGE-TRIGGERED |
2,867 | - |
|
Datasheet | 54ALS | 20-CLCC | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 30 MHz | 21ns @ 5V, 50pF | Positive Edge | 400µA, 4mA | 4.5V ~ 5.5V | 4 mA | - | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
SNJ54ABT574JOCTAL EDGE-TRIGGERED D-TYPE FLIP |
1,777 | - |
|
Datasheet | 54ABT | 20-CDIP (0.300", 7.62mm) | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 150 MHz | 7ns @ 5V, 50pF | Positive Edge | 24mA, 48mA | 4.5V ~ 5.5V | 30 mA | 3.5 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
CD54HC174F3AHIGH SPEED CMOS LOGIC HEX D-TYPE |
3,282 | - |
|
Datasheet | 54HC | 16-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 6 | 35 MHz | 28ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
M38510/30106BEAHEX D-TYPE FLIP-FLOPS WITH CLEAR |
2,083 | - |
|
Datasheet | 54LS | 16-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 6 | 25 MHz | 36ns @ 5V, 50pF | Positive Edge | 400µA, 4mA | 4.5V ~ 5.5V | 26 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
|
SN74HC273APWIC FF D-TYPE SNGL 8BIT 20TSSOP |
3,567 | - |
|
Datasheet | 74HC | 20-TSSOP (0.173", 4.40mm Width) | Bulk | Obsolete | Master Reset | D-Type | Non-Inverted | 1 | 8 | 32 MHz | - | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 3 pF | -40°C ~ 85°C | - | - | Surface Mount | 20-TSSOP |
|
|
CY54FCT374ATDMBOCTAL D-TYPE REGISTERS WITH 3-ST |
2,588 | - |
|
Datasheet | 54FCT | 20-CDIP (0.300", 7.62mm) | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | - | 7.2ns @ 5V, 50pF | Positive Edge | 12mA, 32mA | 4.5V ~ 5.5V | 200 µA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
SNJ54ACT374WOCTAL D-TYPE EDGE-TRIGGERED FLIP |
1,238 | - |
|
Datasheet | 54ACT | 20-CFlatPack | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 160 MHz | 10ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 4.5V ~ 5.5V | 4 µA | 4.5 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-CFP |
Flip Flops FAQ
Common questions about filtering, comparing and sourcing Flip Flops components.
How can I narrow the Flip Flops selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Flip Flops part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
