Flip Flops
Use the filters and product table below to compare Flip Flops components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SN54LS76AJDUAL J-K FLIP-FLOPS WITH PRESET |
4,322 | - |
|
Datasheet | 54LS | 16-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 45 MHz | 20ns @ 5V, 15pF | Negative Edge | 4mA | 4.5V ~ 5.5V | 6 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
|
SNJ54LVTH574W3.3-V ABT OCTAL EDGE-TRIGGERED D |
2,413 | - |
|
Datasheet | 54LVTH | 20-CFlatPack | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 150 MHz | 4.9ns @ 3.3V, 50pF | Positive Edge | 24mA, 48mA | 2.7V ~ 3.6V | 190 µA | 3 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-CFP |
|
|
SN74ALS564BNSIC FF D-TYPE SNGL 8BIT 20SO |
2,100 | - |
|
Datasheet | 74ALS | 20-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | Standard | D-Type | Tri-State, Inverted | 1 | 8 | 30 MHz | 14ns @ 5V, 50pF | Positive Edge | 2.6mA, 24mA | 4.5V ~ 5.5V | 30 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 20-SO |
|
|
SNJ54ACT74WDUAL POSITIVE-EDGE-TRIGGERED D-T |
2,263 | - |
|
Datasheet | 54ACT | 14-CFlatPack | Tube | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 210 MHz | 11ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 4.5V ~ 5.5V | 2 µA | 3 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 14-CFP |
|
|
SNJ54F74FKDUAL POSITIVE-EDGE-TRIGGERED D-T |
4,013 | - |
|
Datasheet | 54F | 20-CLCC | Tube | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 145 MHz | 8ns @ 5V, 50pF | Positive Edge | 1mA, 20mA | 4.5V ~ 5.5V | 16 mA | - | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
|
CD54HC374F3AHIGH SPEED CMOS LOGIC OCTAL POSI |
4,276 | - |
|
Datasheet | 54HC | 20-CDIP (0.300", 7.62mm) | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 60 MHz | 28ns @ 6V, 50pF | Positive Edge | 7.8mA, 7.8mA | 2V ~ 6V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
|
CLVC1G175IDBVRVSPROTOTYPE |
4,342 | - |
|
Datasheet | - | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
JM38510/65305BEADUAL J-K NEGATIVE-EDGE-TRIGGERED |
3,884 | - |
|
Datasheet | 54HC | 16-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 60 MHz | 21ns @ 6V, 50pF | Negative Edge | 5.2mA, 5.2mA | 2V ~ 6V | 4 µA | 3 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
|
JM38510/00204BEADUAL J-K FLIP-FLOPS WITH PRESET |
1,396 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 20 MHz | 40ns @ 5V, 15pF | Positive Edge | 16mA | 4.5V ~ 5.5V | 20 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
CD54HCT74FHIGH SPEED CMOS LOGIC DUAL POSIT |
2,326 | - |
|
Datasheet | 54HCT | 14-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 25 MHz | 40ns @ 4.5V, 50pF | Positive Edge | 4mA, 4mA | 4.5V ~ 5.5V | 4 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CDIP |
Flip Flops FAQ
Common questions about filtering, comparing and sourcing Flip Flops components.
How can I narrow the Flip Flops selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Flip Flops part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
