Flip Flops
Use the filters and product table below to compare Flip Flops components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SN74ACT574NSRE4IC FF D-TYPE SNGL 8BIT 20SO |
2,851 | - |
|
Datasheet | 74ACT | 20-SOIC (0.209", 5.30mm Width) | Bulk | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 110 MHz | 11ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 4.5V ~ 5.5V | 4 µA | 4.5 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 20-SO |
|
SN74HC175PWTIC FF D-TYPE SNGL 4BIT 16TSSOP |
3,396 | - |
|
Datasheet | 74HC | 16-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | Master Reset | D-Type | Complementary | 1 | 4 | 60 MHz | 26ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 3 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-TSSOP |
|
|
SN74LV174APWTIC FF D-TYPE SNGL 6BIT 16TSSOP |
3,312 | - |
|
Datasheet | 74LV | 16-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Master Reset | D-Type | Non-Inverted | 1 | 6 | 180 MHz | 9.2ns @ 5V, 50pF | Positive Edge | 12mA, 12mA | 2V ~ 5.5V | 20 µA | 1.7 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-TSSOP |
|
SN74AUC2G79YEPRIC FF D-TYPE DUAL 1BIT 8DSBGA |
4,042 | - |
|
Datasheet | 74AUC | 8-XFBGA, DSBGA | Tape & Reel (TR) | Obsolete | Standard | D-Type | Non-Inverted | 2 | 1 | 275 MHz | 1.8ns @ 2.5V, 30pF | Positive Edge | 9mA, 9mA | 0.8V ~ 2.7V | 10 µA | 2.5 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 8-DSBGA |
|
SN74F174ANSRIC FF D-TYPE SNGL 6BIT 16SO |
1,255 | - |
|
Datasheet | 74F | 16-SOIC (0.209", 5.30mm Width) | Tape & Reel (TR) | Obsolete | Master Reset | D-Type | Non-Inverted | 1 | 6 | 140 MHz | 10ns @ 5V, 50pF | Positive Edge | 1mA, 20mA | 4.5V ~ 5.5V | 45 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SO |
|
CY74FCT821CTQC8 BIT BUS INTERFACE REGISTER |
3,031 | - |
|
Datasheet | * | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
SN74S112AN3J-K FLIP-FLOP |
2,469 | - |
|
Datasheet | 74S | 16-DIP (0.300", 7.62mm) | Bulk | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 125 MHz | 7ns @ 5V, 50pF | Negative Edge | 1mA, 20mA | 4.75V ~ 5.25V | 252 mA | - | 0°C ~ 70°C (TA) | - | - | Through Hole | 16-PDIP |
|
SN74F534ANBUS DRIVER |
1,247 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
SN74LVC821DW10-BIT BUS INTERFACE FLIP-FLOP W |
10,690 | - |
|
Datasheet | 74LVC | - | Bulk | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
CD74HC173PWTIC FF D-TYPE SNGL 4BIT 16TSSOP |
2,671 | - |
|
Datasheet | 74HC | 16-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Discontinued at Digi-Key | Master Reset | D-Type | Tri-State, Non-Inverted | 1 | 4 | 60 MHz | 34ns @ 6V, 50pF | Positive Edge | 7.8mA, 7.8mA | 2V ~ 6V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 16-TSSOP |
Flip Flops FAQ
Common questions about filtering, comparing and sourcing Flip Flops components.
How can I narrow the Flip Flops selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Flip Flops part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
