Flip Flops
Browse available Flip Flops part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Function | Type | Output Type | Number of Elements | Number of Bits per Element | Clock Frequency | Max Propagation Delay @ V, Max CL | Trigger Type | Current - Output High, Low | Voltage - Supply | Current - Quiescent (Iq) | Input Capacitance | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
SNJ54ABT823FK9-BIT BUS-INTERFACE FLIP-FLOPS W |
3,281 | - |
|
Datasheet | 54ABT | 28-CLCC | Tube | Active | Master Reset | D-Type | Tri-State, Non-Inverted | 1 | 9 | 200 MHz | 6.1ns @ 5V, 50pF | Positive Edge | 24mA, 48mA | 4.5V ~ 5.5V | 38 mA | 4 pF | -55°C ~ 125°C (TA) | - | - | Surface Mount | 28-LCCC (11.43x11.43) |
|
CY54FCT374TDMBOCTAL D-TYPE REGISTERS WITH 3-ST |
3,007 | - |
|
Datasheet | 54FCT | 20-CDIP (0.300", 7.62mm) | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | - | 11ns @ 5V, 50pF | Positive Edge | 12mA, 32mA | 4.5V ~ 5.5V | 200 µA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
CD54AC273F3AOCTAL D-TYPE FLIP-FLOPS WITH RES |
4,189 | - |
|
Datasheet | 54AC | 20-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 100 MHz | 13.5ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 1.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
SN74HC273NSR-PIC FF D-TYPE SNGL 8BIT 20SO |
2,926 | - |
|
Datasheet | 74HC | 20-SOIC (0.209", 5.30mm Width) | Bulk | Obsolete | Master Reset | D-Type | Non-Inverted | 1 | 8 | 60 MHz | 27ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 3 pF | -40°C ~ 85°C (TA) | - | - | Surface Mount | 20-SO |
|
CD54HCT174F3AHIGH SPEED CMOS LOGIC HEX D-TYPE |
1,065 | - |
|
Datasheet | 54HCT | 16-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 6 | 25 MHz | 40ns @ 4.5V, 50pF | Positive Edge | 4mA, 4mA | 4.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
CD74AC74E-NGIC FF D-TYPE DUAL 1BIT 14DIP |
3,546 | - |
|
Datasheet | 74AC | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 110 MHz | 10ns @ 5V, 50pF | Positive Edge | 24mA, 24mA | 1.5V ~ 5.5V | 4 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-PDIP |
|
SN74F112NSIC FF JK-TYPE DUAL 1BIT 16SO |
1,534 | - |
|
Datasheet | 74F | 16-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 130 MHz | 6.5ns @ 5V, 50pF | Negative Edge | 1mA, 20mA | 4.5V ~ 5.5V | 19 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 16-SO |
|
JM38510/32501BRAOCTAL D-TYPE FLIP-FLOP WITH CLEA |
4,033 | - |
|
Datasheet | 54LS | 20-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 40 MHz | 27ns @ 5V, 15pF | Positive Edge | 400µA, 4mA | 4.5V ~ 5.5V | 27 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
SN74ALS534ANSIC FF D-TYPE SNGL 8BIT 20SO |
2,563 | - |
|
Datasheet | 74ALS | 20-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | Standard | D-Type | Tri-State, Inverted | 1 | 8 | 35 MHz | 16ns @ 5V, 50pF | Positive Edge | 2.6mA, 24mA | 4.5V ~ 5.5V | 31 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 20-SO |
|
7601301EADUAL J-K FLIP-FLOPS WITH PRESET |
3,717 | - |
|
Datasheet | 54LS | 16-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 45 MHz | 20ns @ 5V, 15pF | Negative Edge | 4mA | 4.5V ~ 5.5V | 6 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
SN74LS74AN-NGIC FF D-TYPE DUAL 1BIT 14DIP |
1,898 | - |
|
Datasheet | 74LS | 14-DIP (0.300", 7.62mm) | Bulk | Obsolete | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 33 MHz | 40ns @ 5V, 15pF | Positive Edge | 400µA, 8mA | 4.75V ~ 5.25V | 8 mA | - | 0°C ~ 70°C (TA) | - | - | Through Hole | 14-PDIP |
|
JM38510/65601BRAOCTAL D-TYPE FLIP-FLOPS WITH CLE |
1,337 | - |
|
Datasheet | 54HC | 20-CDIP (0.300", 7.62mm) | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 60 MHz | 27ns @ 6V, 50pF | Positive Edge | 5.2mA, 5.2mA | 2V ~ 6V | 8 µA | 3 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
CD4027BFIC FF JK-TYPE DUAL 1BIT 16CDIP |
3,991 | - |
|
Datasheet | 4000B | 16-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 24 MHz | 90ns @ 15V, 50pF | Positive Edge | 6.8mA, 6.8mA | 3V ~ 18V | 20 µA | 5 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
CD54HCT374F3AHIGH SPEED CMOS LOGIC OCTAL POSI |
2,946 | - |
|
Datasheet | 54HCT | 20-CDIP (0.300", 7.62mm) | Tube | Active | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 60 MHz | 33ns @ 4.5V, 50pF | Positive Edge | 6mA, 6mA | 4.5V ~ 5.5V | 8 µA | 10 pF | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
84136012AOCTAL D-TYPE FLIP-FLOPS WITH CLE |
1,756 | - |
|
Datasheet | 54ALS | 20-CLCC | Tube | Active | Master Reset | D-Type | Non-Inverted | 1 | 8 | 30 MHz | 20ns @ 5V, 50pF | Positive Edge | 12mA | 4.5V ~ 5.5V | 29 mA | - | -55°C ~ 125°C (TA) | - | - | Surface Mount | 20-LCCC (8.89x8.89) |
|
CD54HC107F3AHIGH SPEED CMOS LOGIC DUAL NEGAT |
2,942 | - |
|
Datasheet | 54HC | 14-CDIP (0.300", 7.62mm) | Tube | Active | Reset | JK Type | Complementary | 2 | 1 | 60 MHz | 29ns @ 6V, 50pF | Negative Edge | 5.2mA, 5.2mA | 2V ~ 6V | 4 µA | 10 pF | -55°C ~ 125°C | - | - | Through Hole | 14-CDIP |
|
SN5476JDUAL J-K FLIP-FLOPS WITH PRESET |
4,444 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Tube | Active | Set(Preset) and Reset | JK Type | Complementary | 2 | 1 | 20 MHz | 40ns @ 5V, 15pF | Positive Edge | 16mA | 4.5V ~ 5.5V | 20 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 16-CDIP |
|
M38510/32504BRAOCTAL D-TYPE FLIP-FLOPS WITH ENA |
4,394 | - |
|
Datasheet | 54LS | 20-CDIP (0.300", 7.62mm) | Tube | Active | Standard | D-Type | Non-Inverted | 1 | 8 | 40 MHz | 27ns @ 5V, 15pF | Positive Edge | 400µA, 4mA | 4.5V ~ 5.5V | 28 mA | - | -55°C ~ 125°C (TA) | - | - | Through Hole | 20-CDIP |
|
SN74AHC374NSIC FF D-TYPE SNGL 8BIT 20SO |
3,639 | - |
|
Datasheet | 74AHC | 20-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | Standard | D-Type | Tri-State, Non-Inverted | 1 | 8 | 120 MHz | 10.1ns @ 5V, 50pF | Positive Edge | 8mA, 8mA | 2V ~ 5.5V | 4 µA | 4 pF | -40°C ~ 125°C (TA) | - | - | Surface Mount | 20-SO |
|
SN74LS74ANSIC FF D-TYPE DUAL 1BIT 14SO |
4,013 | - |
|
Datasheet | 74LS | 14-SOIC (0.209", 5.30mm Width) | Tube | Obsolete | Set(Preset) and Reset | D-Type | Complementary | 2 | 1 | 33 MHz | 40ns @ 5V, 15pF | Positive Edge | 400µA, 8mA | 4.75V ~ 5.25V | 8 mA | - | 0°C ~ 70°C (TA) | - | - | Surface Mount | 14-SO |
Flip Flops FAQ
Common questions about selecting, comparing and sourcing Flip Flops components through Winsun (HK) Electronics.
What should I check when selecting Flip Flops components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Flip Flops part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Flip Flops parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Flip Flops components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.