Hot Swap Controllers
Use the filters and product table below to compare Hot Swap Controllers components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Number of Channels | Internal Switch(s) | Applications | Features | Programmable Features | Voltage - Supply | Current - Output (Max) | Operating Temperature | Grade | Qualification | Current - Supply | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC4252-2CMS#PBFNEGATIVE VOLTAGE HOT SWAP CONTRO |
1,286 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Active | Hot Swap Controller | 1 | No | -48V | Auto Retry | Current Limit, Fault Timeout, OVP, UVLO | -48V | - | 0°C ~ 70°C | - | - | 800 µA | Surface Mount | 10-MSOP |
|
LTC4253CGN#PBFNEGATIVE 48V HOT SWAP WITH SEQUE |
972 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Hot Swap Controller, Sequencer | 1 | No | -48V | Latched Fault | Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO | -48V | - | 0°C ~ 70°C | - | - | 800 µA | Surface Mount | 16-SSOP |
|
LTC4229IG#PBFIDEAL DIODE AND HOT SWAP CONTROL |
894 | - |
|
Datasheet | - | 24-SSOP (0.209", 5.30mm Width) | Bulk | Active | Hot Swap Controller, OR Controller | 1 | No | General Purpose | OVP, UVLO | Auto Retry, Current Limit, Fault Timeout, Latched Fault | 2.9V ~ 18V | - | -40°C ~ 85°C | - | - | 2 mA | Surface Mount | 24-SSOP |
|
LTC4225CUFD-1#PBFANALOG CIRCUIT, CMOS, PQCC24 |
681 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Bulk | Active | Hot Swap Controller, OR Controller | 2 | No | General Purpose | Latched Fault, UVLO | Current Limit, Fault Timeout, Slew Rate | 2.9V ~ 18V | - | 0°C ~ 70°C | - | - | 2.8 mA | Surface Mount | 24-QFN (4x5) |
|
LTC4260CSW#TRPBFPOSITIVE HIGH VOLTAGE HOT SWAP C |
469 | - |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width) | Bulk | Active | Hot Swap Controller, Monitor | 1 | No | General Purpose | I2C | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, Slew Rate, UVLO | 8.5V ~ 80V | - | 0°C ~ 70°C | - | - | 2 mA | Surface Mount | 24-SOIC |
|
LTC4261IUFD#PBFNEGATIVE VOLTAGE HOT SWAP CONTRO |
314 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad | Bulk | Active | Hot Swap Controller, Monitor | 1 | No | -48V | I2C | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO | -48V | - | -40°C ~ 85°C | - | - | 2 mA | Surface Mount | 24-QFN (4x5) |
|
LTC1421IG-2.5#PBFHOT SWAP CONTROLLER |
523 | - |
|
Datasheet | - | 24-SSOP (0.209", 5.30mm Width) | Bulk | Active | Hot Swap Controller | 2 | No | General Purpose | Latched Fault, UVLO | Circuit Breaker, Fault Timeout, Slew Rate | 3V ~ 12V | - | -40°C ~ 85°C | - | - | 1.5 mA | Surface Mount | 24-SSOP |
|
LTC4251-1CS6#TRPBFLTC4251 - NEGATIVE 48V HOT SWAP |
1,971 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Bulk | Obsolete | Hot Swap Controller | 1 | Both | -48V | Latched Fault, OVP, UVLO | Circuit Breaker, Current Limit, Fault Timeout, OVP, UVLO | -36V ~ -72V | - | 0°C ~ 70°C | - | - | 800 µA | Surface Mount | TSOT-23-6 |
|
|
LTC4216IMS#PBFULTRALOW VOLTAGE HOT SWAP CONTRO |
450 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Bulk | Active | Hot Swap Controller | 1 | No | General Purpose | Latched Fault, UVLO | Current Limit, Fault Timeout | 2.3V ~ 6V | - | -40°C ~ 85°C | - | - | 1.6 mA | Surface Mount | 10-MSOP |
|
LT4250HCN8#PBFNEGATIVE 48V HOT SWAP CONTROLLER |
500 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Hot Swap Controller | 1 | No | -48V | Fault Timeout | Current Limit, Latched Fault, OVP, UVLO | -80V ~ 18V | - | 0°C ~ 70°C | - | - | 1.6 mA | Through Hole | 8-PDIP |
Hot Swap Controllers FAQ
Common questions about filtering, comparing and sourcing Hot Swap Controllers components.
How can I narrow the Hot Swap Controllers selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Hot Swap Controllers part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
