Power Distribution Switches, Load Drivers
Use the filters and product table below to compare Power Distribution Switches, Load Drivers components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
FPF2303MXDUAL OUTPUT CURRENT LIMIT SWITCH |
7,500 | - |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
FPF2102Power Supply Support Circuit, Fi |
2,995 | - |
|
Datasheet | SC-74A, SOT-753 | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 6V | 1.8V ~ 5.5V | 400mA | 125mOhm | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
NCV8406ADTRKGBuffer/Inverter Based Peripheral |
3,234 | - |
|
Datasheet | TO-252-3, DPAK (2 Leads + Tab), SC-63 | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 60V | Not Required | 7A | 185mOhm | Non-Inverting | Auto Restart | Current Limiting (Fixed), Over Temperature, Over Voltage, Short Circuit | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | DPAK |
|
LB1205-EHIGH-VOLTAGE, HIGH-CURRENT DARLI |
26,000 | - |
|
Datasheet | - | * | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
FPF2124Buffer/Inverter Based Peripheral |
2,460 | - |
|
Datasheet | SC-74A, SOT-753 | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 1.5A | 125mOhm | Non-Inverting | Auto Restart, Load Discharge | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
NFVA23512NP2TIC PWR N-CH 1:1 SPMCA-A34 |
2,292 | - |
|
Datasheet | 34-PowerDIP Module (1.480", 37.60mm) | - | Tube | Active | General Purpose | 1 | 1:1 | - | N-Channel | - | - | - | 35A | - | - | - | - | - | - | - | Through Hole | SPMCA-A34 |
|
FPF1208UCXIC LOAD SWITCH ADV 4WLCSP |
192 | - |
|
Datasheet | - | * | Cut Tape (CT) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
FPF1003AIC PWR SWITCH P-CHAN 1:1 6WLCSP |
3,798 | - |
|
Datasheet | 6-UFBGA, WLCSP | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.2V ~ 5.5V | Not Required | 2A | 20mOhm | Non-Inverting | Slew Rate Controlled | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-WLCSP (0.96x1.66) |
|
|
FPF2107IC PWR SWITCH P-CHAN 1:1 SOT23-5 |
2,000 | - |
|
Datasheet | SC-74A, SOT-753 | IntelliMAX™ | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 400mA | 125mOhm | Non-Inverting | Status Flag | Current Limiting (Fixed), Over Temperature, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | SOT-23-5 |
|
GF001HNIC PWR SWITCH P-CHAN 2:1 8MDIP |
2,887 | - |
|
Datasheet | 8-DIP (0.300", 7.62mm) | FPS™ | Tube | Obsolete | General Purpose | 1 | 2:1 | High Side | P-Channel | USB | 2.3V ~ 5.5V | 2.5V ~ 25V | 2.7A | 95mOhm | Differential | Slew Rate Controlled | Reverse Current | -40°C ~ 105°C | - | - | Through Hole | 8-DIP |
Power Distribution Switches, Load Drivers FAQ
Common questions about filtering, comparing and sourcing Power Distribution Switches, Load Drivers components.
How can I narrow the Power Distribution Switches, Load Drivers selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Power Distribution Switches, Load Drivers part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
