Power Distribution Switches, Load Drivers
Use the filters and product table below to compare Power Distribution Switches, Load Drivers components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
VB025MSP6IC PWR DRIVER COIL 380V PWRSO10 |
2,353 | - |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tube | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 10-PowerSO |
|
L9822N013TRIC PWR DRIVER 1:8 PWRSO20 |
3,840 | - |
|
Datasheet | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | - | Tape & Reel (TR) | Obsolete | Relay, Solenoid Driver | 8 | 1:8 | Low Side | - | SPI | 4.5V ~ 5.5V | - | 500mA | 550mOhm | - | Status Flag | - | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PowerSO-20 |
|
|
VBG15NB22T5SPIC PWR DRVR BIPOLAR 1:1 PWRSO10 |
4,560 | - |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | Bipolar | On/Off | 250V (Max) | 14V | 17A | - | - | - | - | -40°C ~ 175°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
E-L9823IC PWR DRIVER N-CHANNEL 1:8 24SO |
1,185 | - |
|
Datasheet | 24-SOIC (0.295", 7.50mm Width) | - | Tube | Active | General Purpose | 8 | 1:8 | Low Side | N-Channel | SPI | 4.5V ~ 5.5V | - | 500mA | 800mOhm | - | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 24-SO |
|
|
VB025MSP613TRIC PWR DRIVER COIL 380V PWRSO10 |
4,868 | - |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 10-PowerSO |
|
TDE1767DPIC PWR DRIVER BIPOLAR 1:1 8DIP |
2,928 | - |
|
Datasheet | 8-DIP (0.300", 7.62mm) | - | Tube | Obsolete | Relay, Solenoid Driver | 1 | 1:1 | High Side | Bipolar | On/Off | 6V ~ 45V | Not Required | 1.2A | - | Inverting, Non-Inverting | - | Current Limiting (Adjustable), Over Temperature | -25°C ~ 85°C (TA) | - | - | Through Hole | 8-DIP |
|
|
VBG15NB22T5SPTRIC PWR DRVR BIPOLAR 1:1 PWRSO10 |
4,742 | - |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | Low Side | Bipolar | On/Off | 250V (Max) | 14V | 17A | - | - | - | - | -40°C ~ 175°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
|
VBG15NB22T5TR-EIC PWR DRVR BIPOLAR 1:1 PWRSO10 |
2,797 | - |
|
Datasheet | PowerSO-10 Exposed Bottom Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | Low Side | Bipolar | On/Off | 250V (Max) | 14V | 17A | - | - | - | - | -40°C ~ 175°C (TJ) | - | - | Surface Mount | 10-PowerSO |
|
|
L9822NIC PWR DRIVER 1:8 PWRSO20 |
4,411 | - |
|
Datasheet | 20-SOIC (0.295", 7.50mm Width) Exposed Pad | - | Tube | Obsolete | Relay, Solenoid Driver | 8 | 1:8 | Low Side | - | SPI | 4.5V ~ 5.5V | - | 500mA | 550mOhm | - | Status Flag | - | -40°C ~ 150°C (TJ) | - | - | Surface Mount | PowerSO-20 |
|
VNW50N04IC PWR DRIVER N-CHAN 1:1 TO247-3 |
1,630 | - |
|
Datasheet | TO-247-3 | OMNIFET™, VIPower™ | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 35V (Max) | Not Required | 35A | 12mOhm (Max) | Non-Inverting | - | Current Limiting (Fixed), Over Temperature, Over Voltage | - | - | - | Through Hole | TO-247-3 |
Power Distribution Switches, Load Drivers FAQ
Common questions about filtering, comparing and sourcing Power Distribution Switches, Load Drivers components.
How can I narrow the Power Distribution Switches, Load Drivers selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Power Distribution Switches, Load Drivers part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
