Power Distribution Switches, Load Drivers
Browse available Power Distribution Switches, Load Drivers part numbers with manufacturer references, stock information, pricing, datasheets and key specifications. Use the table below to compare options for your project.
For BOM, shortage or hard-to-find requirements, send your part number and quantity to Winsun (HK) Electronics for availability, lead-time and quotation support.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Package/Case | Series | Packaging | Product Status | Switch Type | Number of Outputs | Ratio - Input:Output | Output Configuration | Output Type | Interface | Voltage - Load | Voltage - Supply (Vcc/Vdd) | Current - Output (Max) | Rds On (Typ) | Input Type | Features | Fault Protection | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AP22913CN4-7-36IC PWR SWITCH P-CH X1-WLB0909-4 |
2,837 | - |
|
Datasheet | 4-XFBGA, WLBGA | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.4V ~ 5.5V | Not Required | 2A | 54mOhm | Non-Inverting | Load Discharge, Slew Rate Controlled | Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | X1-WLB0909-4 |
|
FPF3688UCX-SN00396IC LOAD SWITCH WLCSP |
4,054 | - |
|
Datasheet | - | - | Tape & Reel (TR) | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
|
NCP451AFCCT2GIC PWR SWITCH N-CHAN 1:1 6WLCSP |
2,761 | - |
|
Datasheet | 6-UFBGA, WLCSP | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.75V ~ 5.5V | Not Required | 3A | 12mOhm | Non-Inverting | Load Discharge | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-WLCSP (1.4x0.9) |
|
|
SLG59M1693CIC PWR SWITCH N-CHAN 1:1 4WLCSP |
4,642 | - |
|
Datasheet | 4-XFBGA, WLCSP | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.8V ~ 2V | Not Required | 1A | 17.4mOhm | CMOS | Load Discharge | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 4-WLCSP (0.75x0.75) |
|
|
SLG59M1720VIC PWR SWITCH N-CHAN 1:1 6STDFN |
1,928 | - |
|
Datasheet | 6-UFDFN | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.85V ~ 3.6V | 2.5V ~ 3.6V | 2A | 18mOhm | CMOS | Load Discharge, Slew Rate Controlled | Current Limiting (Fixed), Over Temperature | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-STDFN (1x1.4) |
|
|
SLG59M1721VIC PWR SWITCH N-CHAN 1:1 6STDFN |
2,716 | - |
|
Datasheet | 6-UFDFN | - | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | High Side | N-Channel | On/Off | 0.85V ~ 3.6V | 2.5V ~ 3.6V | 2A | 18mOhm | CMOS | Slew Rate Controlled | Current Limiting (Fixed), Over Temperature | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-STDFN (1x1.4) |
|
VNL5030S5-EIC DVR LOW-SIDE OMNI III 8SOIC |
2,794 | - |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | OMNIFET III™, VIPower™ | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 36V | 3.5V ~ 5.5V | 25A | 30mOhm (Max) | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, Short Circuit | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
|
VNL5090S5-EIC DVR LOW-SIDE OMNI III 8SOIC |
4,823 | - |
|
Datasheet | 8-SOIC (0.154", 3.90mm Width) | OMNIFET III™, VIPower™ | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 36V | 3.5V ~ 5.5V | 13A | 90mOhm (Max) | Non-Inverting | Auto Restart, Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, Short Circuit | -40°C ~ 150°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
|
MAX14713EWL+CKAIC PMIC BATTERY POWER WLP |
2,735 | - |
|
Datasheet | 15-WFBGA, WLBGA | - | Tape & Reel (TR) | Obsolete | General Purpose | 1 | 2:1 | High Side | - | On/Off | - | 1.6V ~ 5.5V | 6A | 11mOhm | - | - | - | -40°C ~ 85°C (TA) | - | - | Surface Mount | 15-WLP (1.22x2.05) |
|
|
BTS410E2E3043BKSA1IC PWR SWITCH HI SIDE TO220-5 |
2,205 | - |
|
Datasheet | - | * | Tape & Reel (TR) | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MC40XS6500CEKHIGH-SIDE SWITCH 12V PENTA 40MOH |
1,820 | - |
|
Datasheet | 32-SSOP (0.295", 7.50mm Width) Exposed Pad | - | Tube | Obsolete | General Purpose | 5 | 1:1 | High Side | N-Channel | SPI | 7V ~ 18V | 4.5V ~ 5.5V | 3.9A | 40mOhm | CMOS | Slew Rate Controlled | Current Limiting (Fixed), Open Load Detect, Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 32-SOIC-EP |
|
|
NX30P0121UKAZCOMPANION BACK TO BACK OVP SWITC |
1,485 | - |
|
Datasheet | 12-UFBGA, WLCSP | NX3 | Tape & Reel (TR) | Active | General Purpose | 1 | 1:1 | - | N-Channel | - | 2.5V ~ 20V | Not Required | 3A | 54mOhm | - | - | Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 12-WLCSP (1.65x1.25) |
|
MC08XS6421CEKR2HIGH-SIDE SWITCH 12V DUAL 8MOHMS |
4,967 | - |
|
Datasheet | 54-SSOP (0.295", 7.50mm Width) Exposed Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 4 | 1:1 | High Side | N-Channel | SPI | 7V ~ 18V | 4.5V ~ 5.5V | 5.5A, 11A | 8mOhm, 21mOhm | CMOS | - | Current Limiting (Fixed), Open Load Detect, Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 54-HSOP |
|
|
MC08XS6421CEKHIGH-SIDE SWITCH 12V DUAL 8MOHMS |
3,379 | - |
|
Datasheet | 54-SSOP (0.295", 7.50mm Width) Exposed Pad | - | Tube | Obsolete | General Purpose | 4 | 1:1 | High Side | N-Channel | SPI | 7V ~ 18V | 4.5V ~ 5.5V | 5.5A, 11A | 8mOhm, 21mOhm | CMOS | - | Current Limiting (Fixed), Open Load Detect, Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 54-HSOP |
|
|
MC40XS6500CEKR2HIGH-SIDE SWITCH 12V PENTA 40MOH |
4,994 | - |
|
Datasheet | 32-SSOP (0.295", 7.50mm Width) Exposed Pad | - | Tape & Reel (TR) | Obsolete | General Purpose | 5 | 1:1 | High Side | N-Channel | SPI | 7V ~ 18V | 4.5V ~ 5.5V | 3.9A | 40mOhm | CMOS | Slew Rate Controlled | Current Limiting (Fixed), Open Load Detect, Over Temperature | -40°C ~ 125°C (TA) | - | - | Surface Mount | 32-SOIC-EP |
|
|
MAX14915AFS+IC POWER DRIVER SMD |
1,833 | - |
|
Datasheet | - | - | Tray | Obsolete | General Purpose | 8 | 1:8 | High Side | - | SPI, Parallel | 10V ~ 36V | 2.5V ~ 5.5V | 1.3A | 120mOhm | - | Status Flag | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO | -40°C ~ 125°C (TA) | - | - | - | - |
|
|
FPF2G75FH07BPIC LOAD SWITCH |
1,185 | - |
|
Datasheet | - | * | Tray | Obsolete | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
MAX16076ATP/V+TGH7LOW-VOLTAGE, HIGH-ACCURACY, QUAD |
3,424 | - |
|
Datasheet | 20-WFQFN Exposed Pad | - | Tape & Reel (TR) | Obsolete | USB Switch | 1 | 1:1 | High Side | P-Channel | On/Off | 2.7V ~ 5.5V | Not Required | 700mA | 60mOhm | Non-Inverting | - | Current Limiting (Adjustable), Over Temperature, UVLO | -40°C ~ 85°C (TA) | Automotive | AEC-Q100 | Surface Mount | 20-TQFN (4x4) |
|
FPF2144BUFFER/INVERTER PERIPHL DRIVER |
4,569 | - |
|
Datasheet | 6-VDFN Exposed Pad | - | Bulk | Obsolete | General Purpose | 1 | 1:1 | High Side | P-Channel | On/Off | 1.8V ~ 5.5V | Not Required | 400mA | 120mOhm | Non-Inverting | Auto Restart, Power Good, Status Flag | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO | -40°C ~ 85°C (TA) | - | - | Surface Mount | 6-MicroFET (2x2) |
|
AUIPS1011SINTELLIGENT POWER SWITCH |
3,572 | - |
|
Datasheet | TO-263-3, D2PAK (2 Leads + Tab), TO-263AB | - | Tube | Obsolete | General Purpose | 1 | 1:1 | Low Side | N-Channel | On/Off | 36V (Max) | Not Required | 6.5A | 10mOhm | Non-Inverting | - | Current Limiting (Fixed), Over Temperature | -40°C ~ 150°C (TJ) | Automotive | AEC-Q100 | Surface Mount | D2PAK |
Power Distribution Switches, Load Drivers FAQ
Common questions about selecting, comparing and sourcing Power Distribution Switches, Load Drivers components through Winsun (HK) Electronics.
What should I check when selecting Power Distribution Switches, Load Drivers components?
Compare the manufacturer part number, electrical specifications, package, operating conditions and application requirements. The product datasheet should be used to confirm technical suitability.
Can Winsun help source specific Power Distribution Switches, Load Drivers part numbers?
Yes. Send the exact part number, manufacturer and required quantity. Winsun (HK) Electronics can assist with availability checks, quotation support and sourcing options based on your requirement.
Do you support shortage, obsolete or hard-to-find Power Distribution Switches, Load Drivers parts?
Yes. Our sourcing team can review shortage and obsolete-part requirements and help check available supply channels or possible alternatives when appropriate.
How do I request a quote for Power Distribution Switches, Load Drivers components?
Submit an RFQ with the part number, manufacturer, quantity and target delivery requirement. Our sales team will review your request and follow up with current sourcing information.
