Power Relays, Over 2 Amps
Use the filters and product table below to compare Power Relays, Over 2 Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Packaging | Product Status | Mounting Type | Coil Voltage | Contact Form | Contact Rating (Current) | Switching Voltage | Load - Max Switching | Coil Current | Coil Type | Features | Termination Style | Seal Rating | Coil Insulation | Must Operate Voltage | Must Release Voltage | Operate Time | Release Time | Operating Temperature | Contact Material | Relay Type | Grade | Qualification |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
FCAC-150-CU4FCAC-150-CU4=50 AMP MID-RANGE |
2,897 | - |
|
Datasheet | FCAC-150, CII | Bulk | Active | Chassis Mount | 28VDC | SPST-NO (DM) (1 Form X) | 50 A | - | - | 96.6 mA | Non Latching | Diode | Solder Hook | Sealed - Hermetically | - | 18 VDC | 1.5 VDC | 15 ms | 15 ms | -70°C ~ 125°C | Silver Cadmium Oxide (AgCdO) | General Purpose | - | - |
|
|
HC-1/115VDCRELAY SPDT 25A 115V |
1,867 | - |
|
Datasheet | HC, KILOVAC | Bulk | Active | Panel Mount | 115VDC | SPDT (1 Form C) | 25 A | - | - | 19.2 mA | Non Latching | - | Solder Turret | Sealed - Vacuum | - | 80 VDC | 50 VDC | 6 ms | 6 ms | -55°C ~ 125°C | - | General Purpose | - | - |
|
|
HC-3/115VDCHC-3/115VDC=RELAY, VACUUM, SPD |
3,799 | - |
|
Datasheet | HC, KILOVAC | Bulk | Active | Panel Mount | 115VDC | SPDT (1 Form C) | 18 A | - | - | 19.2 mA | Non Latching | - | Solder Turret | Sealed - Vacuum | - | 80 VDC | 5 VDC | 6 ms | 6 ms | -55°C ~ 125°C | - | General Purpose | - | - |
|
|
1618006-1AP10A-02=RELAY, VACUUM, SPST-N |
4,398 | - |
|
Datasheet | AP10, KILOVAC | Bulk | Active | Chassis Mount | 12VDC | SPST-NO (1 Form A) | 10 A | 270VDC - Nom | - | 226.4 mA | Non Latching | - | Stud | Sealed - Vacuum | - | 10 VDC | 0.3 VDC | 7 ms | 10 ms | -55°C ~ 85°C | - | General Purpose | - | - |
|
|
4-1618278-9RELAY SPDT 25V |
1,593 | - |
|
Datasheet | KC, KILOVAC | Bulk | Discontinued at Digi-Key | Panel Mount | 25VDC | SPDT (1 Form C) | 50 A | - | - | - | Non Latching | - | Solder Turret | Sealed - Vacuum | - | - | - | 15 ms | 9 ms | -55°C ~ 125°C | - | General Purpose | - | - |
|
|
HC-2/12VDCHC-2/12VDC=RELAY, VACUUM, SPDT |
1,771 | - |
|
Datasheet | HC, KILOVAC | Bulk | Active | Panel Mount | 12VDC | SPDT (1 Form C) | 25 A | - | - | 150 mA | Non Latching | - | Solder Turret | Sealed - Vacuum | - | 8 VDC | 0.5 VDC | 6 ms | 6 ms | -55°C ~ 125°C | - | General Purpose | - | - |
|
|
3-1618006-0RELAY SPST 25A 28V |
3,076 | - |
|
Datasheet | AP10, KILOVAC | Bulk | Active | Panel Mount | 28VDC | SPST-NC (1 Form B) | 25 A | 270VDC - Nom | - | 96.6 mA | Non Latching | - | Solder Turret | Sealed - Vacuum | - | 20 VDC | 12 VDC | 7 ms | 10 ms | -55°C ~ 85°C | - | General Purpose | - | - |
|
|
6-1618007-0RELAY SPST 5A 120V |
1,069 | - |
|
Datasheet | AP5, KILOVAC | Bulk | Active | Panel Mount | 120VAC | SPST-NC (1 Form B) | 5 A | - | - | - | Non Latching | - | PC Pin | - | - | 85 VDC | 55 VDC | 7 ms | 10 ms | -55°C ~ 85°C | - | - | - | - |
|
|
6-1618007-1RELAY GEN PURPOSE SPST 5A 120V |
3,115 | - |
|
Datasheet | AP5, KILOVAC | Bulk | Active | Panel Mount | 120VDC | SPST-NC (1 Form B) | 5 A | - | - | - | - | - | Wire Leads | - | - | 85 VDC | 55 VDC | 7 ms | 10 ms | -55°C ~ 85°C | - | General Purpose | - | - |
|
|
6-1618007-8RELAY SPST 20A 12V |
3,370 | - |
|
Datasheet | AP5, KILOVAC | Bulk | Active | Panel Mount | 12VDC | SPST-NC (1 Form B) | 20 A | - | - | - | Non Latching | - | Stud | - | - | 10 VDC | 6 VDC | 7 ms | 10 ms | -55°C ~ 85°C | - | - | - | - |
Power Relays, Over 2 Amps FAQ
Common questions about filtering, comparing and sourcing Power Relays, Over 2 Amps components.
How can I narrow the Power Relays, Over 2 Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Power Relays, Over 2 Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
