RF Mixers
Use the filters and product table below to compare RF Mixers components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | RF Type | Frequency | Number of Mixers | Gain | Noise Figure | Secondary Attributes | Current - Supply | Voltage - Supply | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT5560EDD#PBFIC MIXER 10KHZ-4GHZ UP/DWN 8DFN |
2,293 | - |
|
Datasheet | LT5560 | 8-WFDFN Exposed Pad | Tube | Active | CATV, DBS, PHS, UHF, VHF | 10kHz ~ 4GHz | 1 | 2.4dB | 9.3dB | Up/Down Converter | 12mA | 2.7V ~ 5.3V | Surface Mount | 8-DFN (3x3) |
|
|
LT5560EDD#TRPBFIC MIXER 10KHZ-4GHZ UP/DWN 8DFN |
1,690 | - |
|
Datasheet | LT5560 | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | CATV, DBS, PHS, UHF, VHF | 10kHz ~ 4GHz | 1 | 2.4dB | 9.3dB | Up/Down Converter | 12mA | 2.7V ~ 5.3V | Surface Mount | 8-DFN (3x3) |
|
LTC5562IUC#TRPBFLF-7GHZ LOW-POWER, WIDEBAND ACTI |
2,585 | - |
|
Datasheet | - | 10-WFQFN Exposed Pad | Tape & Reel (TR) | Active | - | 0Hz ~ 7GHz | 1 | - | 14.6dB | - | 40mA | 3.3V | Surface Mount | 10-QFN (2x2) |
|
ADL5350ACPZ-R7IC MIXER 750MHZ-4GHZ 8LFCSP |
2,390 | - |
|
Datasheet | ADL5350 | 8-VFDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Cellular, CDMA, GSM | 750MHz ~ 4GHz | 1 | - | 6.5dB | - | 16.5mA | 2.7V ~ 3.5V | Surface Mount | 8-LFCSP-VD (3x2) |
|
AD608ARZ-RLIC MIXER 500MHZ DOWN CONV 16SOIC |
786 | - |
|
Datasheet | AD608 | 16-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | FM, GSM, PM, PHS, FM | 500MHz | 1 | 24dB | 16dB | With Amplifier | 7.3mA | 2.7V ~ 5.5V | Surface Mount | 16-SOIC |
|
AD8343ARUZ-REEL7IC MXR 0HZ-2.5GHZ UP/DWN 14TSSOP |
1,100 | - |
|
Datasheet | AD8343 | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Cellular, WLAN | 0Hz ~ 2.5GHz | 1 | 7dB | 14dB | Up/Down Converter | 60mA | 4.5V ~ 5.5V | Surface Mount | 14-TSSOP |
|
|
LTC5562IUC#TRMPBFLF-7GHZ LOW-POWER, WIDEBAND ACTI |
1,087 | - |
|
Datasheet | - | 10-WFQFN Exposed Pad | Tape & Reel (TR) | Active | - | 0Hz ~ 7GHz | 1 | - | 14.6dB | - | 40mA | 3.3V | Surface Mount | 10-QFN (2x2) |
|
LTC5510IUF#PBFHIGH LINEARITY MIXER 16QFN |
365 | - |
|
Datasheet | - | 16-WQFN Exposed Pad | Tube | Active | General Purpose | 1MHz ~ 6GHz | 1 | 1.5dB | 11.6dB | Up/Down Converter | 105mA | 3.1V ~ 5.3V | Surface Mount | 16-QFN (4x4) |
|
ADL5801ACPZ-R7IC MXR 10MHZ-6GHZ UP/DWN 24LFCSP |
2,941 | - |
|
Datasheet | - | 24-VFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Cellular | 10MHz ~ 6GHz | 1 | 1.8dB | 9.75dB | Up/Down Converter | 130mA | 4.75V ~ 5.25V | Surface Mount | 24-LFCSP-VQ (4x3.75) |
|
HMC220BMS8GETR5-12 GHZ DBL-BAL MIXER |
1,098 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tape & Reel (TR) | Active | VSAT | 5GHz ~ 12GHz | 1 | - | 10dB | Up/Down Converter | - | - | Surface Mount | 8-MSOP-EP |
RF Mixers FAQ
Common questions about filtering, comparing and sourcing RF Mixers components.
How can I narrow the RF Mixers selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific RF Mixers part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
