Fixed Inductors
Use the filters and product table below to compare Fixed Inductors components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Type | Material - Core | Inductance | Tolerance | Current Rating (Amps) | Current - Saturation (Isat) | Shielding | DC Resistance (DCR) | Q @ Freq | Frequency - Self Resonant | Ratings | Operating Temperature | Inductance Frequency - Test | Features | Mounting Type | Supplier Device Package | Size / Dimension | Height - Seated (Max) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ASPC70-471K-RC470uH +/-10% Power Shielded Ind |
4,672 | - |
|
Datasheet | ASPC70 | Axial | Bag | Active | Wirewound | - | 470 µH | ±10% | 556 mA | - | Shielded | 170mOhm | - | - | - | -55°C ~ 125°C | 1 kHz | - | Through Hole | Axial | 0.300" Dia x 0.725" L (7.62mm x 18.42mm) | - |
|
|
ASPC80-333K-RC33mH +/-10% Power Shielded Induc |
4,105 | - |
|
Datasheet | ASPC80 | Axial | Bag | Active | - | - | 33 mH | ±10% | 224 mA | - | Shielded | 2.78Ohm Max | - | - | - | -55°C ~ 125°C | 1 kHz | - | Through Hole | Axial | 0.550" Dia x 1.000" L (13.97mm x 25.40mm) | - |
|
|
AC20-R47K-RC.47uH +/-10% Axial Leaded Induct |
3,945 | - |
|
Datasheet | AC20 | Axial | Tape & Reel (TR) | Active | - | - | 470 nH | ±10% | 1 A | - | Unshielded | 110mOhm Max | 40 @ 25.2MHz | 300MHz | - | -20°C ~ 100°C | 25.2 MHz | - | Through Hole | Axial | 0.118" Dia x 0.276" L (3.00mm x 7.01mm) | - |
|
|
RDC60-183K-RC18000uH +/-10% Radial Drum Core |
4,483 | - |
|
Datasheet | RDC60 | Radial, Vertical Cylinder | Case | Active | Drum Core | - | 18 mH | ±10% | 2.8 A | 2A | Unshielded | 1.94Ohm Max | - | - | - | -55°C ~ 125°C | 1 kHz | - | Through Hole | Radial | 2.000" Dia (50.80mm) | 1.500" (38.10mm) |
|
PCSAU127-560M-RC56UH, POWER INDUCTOR |
2,336 | - |
|
Datasheet | - | Nonstandard | Tape & Reel (TR) | Active | - | - | 56 µH | ±20% | - | 4.8A | Shielded | 110mOhm Max | - | - | AEC-Q200 | -40°C ~ 125°C | 1 kHz | - | Surface Mount | - | 0.492" L x 0.492" W (12.50mm x 12.50mm) | 0.315" (8.00mm) |
|
SQAC0807-17NJ-RC17nH 5% Square Air Coil |
4,781 | - |
|
Datasheet | - | Nonstandard | Tape & Reel (TR) | Active | - | Air | 17 nH | ±5% | 2.7 A | - | Unshielded | 9mOhm Max | 100 @ 400MHz | 4GHz | - | -40°C ~ 125°C | 400 MHz | - | Surface Mount | - | 0.090" L x 0.072" W (2.29mm x 1.83mm) | 0.070" (1.78mm) |
|
AC30-101J-RC100UH 5% AXIAL INDUCTOR |
1,373 | - |
|
Datasheet | AC30 | Axial | Box | Active | - | - | 100 µH | ±5% | 275 mA | - | Unshielded | 2.5Ohm Max | 30 @ 2.52MHz | 4.8MHz | - | -20°C ~ 100°C | 2.52 MHz | - | Through Hole | Axial | 0.157" Dia x 0.394" L (3.99mm x 10.01mm) | - |
|
APC30-821K-RC-TR820UH 10% AXIAL POWER CHOKE |
3,523 | - |
|
Datasheet | APC30 | Axial | Bag | Active | - | - | 820 µH | ±10% | 800 mA | 970mA | - | 661mOhm Max | - | - | - | -55°C ~ 125°C | 23 kHz | - | Through Hole | Axial | 0.470" Dia x 0.920" L (11.94mm x 23.37mm) | - |
|
PC03021-101M-RC100UH 20% POWER CHIP INDUCTOR |
4,495 | - |
|
Datasheet | - | Nonstandard | Tape & Reel (TR) | Active | Wirewound | - | 100 µH | ±20% | 250 mA | - | Unshielded | 2.52Ohm Max | - | - | - | -40°C ~ 105°C | 1 kHz | - | Surface Mount | - | 0.130" L x 0.118" W (3.30mm x 3.00mm) | 0.094" (2.40mm) |
|
PCHC40-R33M-RC.33UH 20%PWR CHIP HIGH CURRENT |
2,907 | - |
|
Datasheet | - | Nonstandard | Tape & Reel (TR) | Active | Wirewound | - | 330 nH | ±20% | 16 A | 20A | Unshielded | 2mOhm Max | - | 300MHz | - | -40°C ~ 85°C | 100 kHz | - | Surface Mount | - | 0.520" L x 0.390" W (13.21mm x 9.91mm) | 0.250" (6.35mm) |
Fixed Inductors FAQ
Common questions about filtering, comparing and sourcing Fixed Inductors components.
How can I narrow the Fixed Inductors selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Fixed Inductors part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
