Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISL28208FBZ-T13IC OPAMP GP 2 CIRCUIT 8SOIC |
32,742 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.45V/µs | 1.2 MHz | - | 13 nA | 25 µV | 185µA (x2 Channels) | 30 mA | 3 V | 40 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
EL5393ACSIC OPAMP CFA 3 CIRCUIT 16SOIC |
300 | - |
|
Datasheet | EL5393A | 16-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 3 | - | 2200V/µs | - | 300 MHz | 1 µA | 1 mV | 4mA (x3 Channels) | 120 mA | 5 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SOIC |
|
HFA1205IPIC OPAMP GP 2 CIRCUIT 8MSOP |
6,684 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | General Purpose | 2 | - | 2400V/µs | - | 425 MHz | 6 µA | 2 mV | 5.8mA (x2 Channels) | 60 mA | - | - | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
HFA1115IPIC BUFFER 1 CIRCUIT 8SOIC |
36,135 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Buffer | 1 | - | 1660V/µs | - | 225 MHz | 1 µA | 2 mV | 6.9mA | 55 mA | 5 V | 10 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ISL28278FAZ-T7IC OPAMP GP 2 CIRCUIT 16QSOP |
4,000 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.15V/µs | 300 kHz | - | 10 pA | 0.2 µV | 120µA (x2 Channels) | 31 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
|
|
ISL28486FAZ-T7IC OPAMP GP 4 CIRCUIT 16QSOP |
1,954 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.17V/µs | 400 kHz | - | 500 pA | 20 µV | 240µA | 31 mA | 2.4 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
|
ISL28278FAZ-TZIC OPAMP GP 2 CIRCUIT 16QSOP |
1,000 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.15V/µs | 300 kHz | - | 10 pA | 0.2 µV | 120µA (x2 Channels) | 31 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
|
EL5166ISIC OPAMP CFA 1 CIRCUIT 8SOIC |
47,791 | - |
|
Datasheet | EL5166 | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 1 | - | 6000V/µs | - | 1.4 GHz | - | 500 µV | 8.5mA | 200 mA | 5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
HA7-2515-5IC OPAMP GP 1 CIRCUIT 8CERDIP |
120 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 60V/µs | 12 MHz | - | 125 nA | 5 mV | 4mA | 20 mA | 40 V | 40 V | 0°C ~ 75°C | - | - | Through Hole | 8-CERDIP |
|
|
ISL28233IUZIC ZERO-DRIFT 2 CIRCUIT 8MSOP |
309 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Obsolete | Zero-Drift | 2 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 300 pA | 2 µV | 18µA (x2 Channels) | 17 mA | 1.8 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
