Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
HA9P5195-5IC OPAMP GP 1 CIRCUIT 14SOIC |
3,956 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | - | 200V/µs | 150 MHz | - | 5 µA | 3 mV | 19mA | 30 mA | - | - | 0°C ~ 75°C | - | - | Surface Mount | 14-SOIC |
|
EL5127CYZIC BUFFER 4 CIRCUIT 10MSOP |
331 | - |
|
Datasheet | EL5127 | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Buffer | 4 | Rail-to-Rail | 2.2V/µs | - | 2.5 MHz | 2 nA | 1 mV | 750µA (x4 Channels) | 120 mA | 4.5 V | 16.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
HA3-2605-5IC OPAMP GP 1 CIRCUIT 8DIP |
3,595 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 7V/µs | 12 MHz | - | 5 nA | 3 mV | 3mA | 18 mA | 45 V | 45 V | 0°C ~ 75°C | - | - | Through Hole | 8-PDIP |
|
ISL28272FAZIC INST AMP 2 CIRCUIT 16QSOP |
1,950 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tube | Obsolete | Instrumentation | 2 | Rail-to-Rail | 0.5V/µs | - | 100 kHz | 10 pA | 35 µV | 120µA | 31 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
|
|
HFA1112IPIC BUFFER 1 CIRCUIT 8DIP |
170 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Buffer | 1 | - | 2400V/µs | - | 850 MHz | 25 µA | 8 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
EL2141CSIC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,585 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Differential | 1 | Differential | 800V/µs | 400 MHz | 150 MHz | 6 µA | 10 mV | 11mA | 60 mA | 6 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
EL5364ISIC OPAMP CFA 3 CIRCUIT 16SOIC |
224 | - |
|
Datasheet | EL5364 | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 3 | - | 4200V/µs | - | 600 MHz | 2 µA | 1.5 mV | 3.5mA (x3 Channels) | 140 mA | 5 V | 10 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 16-SOIC |
|
|
HFA1120IBIC OPAMP CFA 1 CIRCUIT 8SOIC |
4,947 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 1 | - | 2300V/µs | - | 670 MHz | 12 µA | 2 mV | 21mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
HA9P2444-5IC OPAMP GP 4 CIRCUIT 16SOIC |
2,156 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | General Purpose | 4 | - | 120V/µs | 50 MHz | - | 9 µA | 4 mV | 20mA | 25 mA | 17 V | 34 V | 0°C ~ 75°C | - | - | Surface Mount | 16-SOIC |
|
|
ISL28476FAZ-T7IC OPAMP GP 4 CIRCUIT 16QSOP |
21,009 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.13V/µs | 400 kHz | - | 500 pA | 20 µV | 55µA (x4 Channels) | 31 mA | 2.4 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-QSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
