Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX480CPAIC OPAMP GP 1 CIRCUIT 8DIP |
4,117 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 0.012V/µs | - | - | 1 nA | 25 µV | 14µA | 5 mA | 1.6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX4369EBL+TIC OP AMP DUAL R-R 9-UCSP |
2,500 | - |
|
Datasheet | - | 9-WFBGA, WLBGA | Bulk | Obsolete | General Purpose | 2 | Differential, Rail-to-Rail | 1V/µs | 3.5 MHz | - | 200 nA | 350 µV | 1mA (x2 Channels) | 250 mA | 2.3 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 9-WLP |
|
|
ICL7652BCPAIC OPAMP CHOPPER/STABLE 8-DIP |
1,560 | - |
|
Datasheet | * | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 0.5V/µs | - | - | - | - | - | - | - | - | - | - | - | Through Hole | 8-PDIP |
|
MAX473MJAIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,060 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 700 µV | 2mA | - | 2.7 V | 5.25 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
MAX4207ETEIC LOGARITHMIC 1 CIRCUIT 16TQFN |
2,937 | - |
|
Datasheet | - | 16-WQFN Exposed Pad | Tube | Obsolete | Logarithmic | 1 | - | 12V/µs | 5 MHz | 1 MHz | 10 pA | 600 µV | 5mA | 58 mA | 2.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 16-TQFN (4x4) |
|
ICL7642CCPDIC CMOS 4 CIRCUIT 14DIP |
3,904 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 4 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 10 mV | 1mA (x4 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
MAX9627ATC+TIC OPAMP DIFF 1 CIRCUIT 12TQFN |
4,103 | - |
|
Datasheet | - | 12-WFQFN Exposed Pad | Tape & Reel (TR) | Active | Differential | 1 | Differential | 6100V/µs | - | 700 MHz | 1 µA | 2 mV | 59mA | 100 mA | 2.85 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 12-TQFN (3x3) |
|
MAX3760ESAIC PREAMP LN TRANS 622MBPS 8SOIC |
1,665 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | Transimpedance | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 8-SOIC |
|
MAX494CSDIC OPAMP GP 4 CIRCUIT 14SOIC |
2,150 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 25 nA | 200 µV | 150µA (x4 Channels) | 30 mA | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
MAX4183EUBIC OPAMP CFA 2 CIRC 10UMAX/USOP |
134 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 450V/µs | - | 245 MHz | 1 µA | 1.5 mV | 1mA (x2 Channels) | 60 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 10-uMAX/uSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
