Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4432EUA+IC OPAMP GP 2 CIRCUIT 8UMAX |
2,535 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 2 | - | 100V/µs | - | 180 MHz | 11 µA | 1.25 mV | 11mA (x2 Channels) | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
MAX475CSD+IC OPAMP GP 4 CIRCUIT 14SOIC |
190 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 800 µV | 2mA (x4 Channels) | - | 2.7 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
ICL7652BCPDIC OPAMP ZER-DRIFT 1CIRC 14DIP |
1,482 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 0.5V/µs | 450 kHz | - | 15 pA | 700 µV | 2mA | - | 5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
MAX4189ESDIC OPAMP TRIPLE LOWGLITCH 14SOIC |
475 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 3 | - | 175V/µs | - | 250 MHz | 2 µA | 1 mV | 1.5mA (x3 Channels) | 55 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
MAX4022ESDGAIN OF 2 BUFFER WITH R-R O/P |
329 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Buffer, Voltage Feedback | 4 | Rail-to-Rail | 600V/µs | - | 200 MHz | 5.4 µA | 4 mV | 5.5mA (x4 Channels) | 120 mA | 3.15 V | 11 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
|
MAX4432EUAIC OPAMP GP 2 CIRCUIT 8UMAX |
3,284 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 2 | - | 100V/µs | - | 180 MHz | 11 µA | 1.25 mV | 11mA (x2 Channels) | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX/uSOP |
|
ICL7650CPA+IC OPAMP ZER-DRIFT 1CIRC 8DIP |
3,957 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Chopper (Zero-Drift) | 1 | - | 2.5V/µs | 2 MHz | - | 1.5 pA | 700 µV | 1.2mA | - | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX4431ESA+IC OPAMP VFB 1 CIRCUIT 8SOIC |
4,173 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | - | 145V/µs | - | 215 MHz | 11 µA | 1.25 mV | 11mA | 60 mA | 9 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
MAX475EPDIC OPAMP GP 4 CIRCUIT 14DIP |
1,595 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 17V/µs | 12 MHz | - | 80 nA | 800 µV | 2mA (x4 Channels) | - | 2.7 V | 5.25 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
MAX4384EUP+IC OPAMP VFB 4 CIRCUIT 20TSSOP |
111 | - |
|
Datasheet | - | 20-TSSOP (0.173", 4.40mm Width) | Tube | Last Time Buy | Voltage Feedback | 4 | Rail-to-Rail | 485V/µs | - | 210 MHz | 8.5 µA | 3 mV | 7.5mA (x4 Channels) | 75 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 20-TSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
