Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4131EPAIC OPAMP GP 1 CIRCUIT 8DIP |
1,414 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 10 MHz | - | 50 nA | - | 1mA | 50 mA | 2.7 V | 6.5 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
MAX408ACPA-2IC OPAMP GP 1 CIRCUIT 8DIP |
1,378 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 90V/µs | 100 MHz | - | 650 nA | 5 mV | 7mA | - | 8 V | 8 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
MAX4075BKESAIC OPAMP GP 2 CIRCUIT 8SOIC |
1,367 | - |
|
Datasheet | GainAmp™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.1V/µs | 4 MHz | 82 kHz | 0.8 pA | 200 µV | 37µA (x2 Channels) | 22 mA | 2.5 V | 5.5 V | -40°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
MAX4186EEEIC OPAMP CFA 4 CIRCUIT 16QSOP |
1,325 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 4 | - | 450V/µs | - | 245 MHz | 1 µA | 1.5 mV | 1mA (x4 Channels) | 60 mA | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QSOP |
|
ICL7614DCTV-2IC OPAMP GP 1 CIRCUIT TO99-8 |
1,317 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 1.6V/µs | 1.4 MHz | - | 1 pA | 15 mV | 1mA | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
ICL7632BCSEIC CMOS 3 CIRCUIT 16SOIC |
4,889 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 3 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 5 mV | 1mA (x3 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
MAX495MJAIC OPAMP GP 1 CIRCUIT 8CERDIP |
953 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.2V/µs | 500 kHz | - | 25 nA | 200 µV | 150µA | 30 mA | 2.7 V | 6 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
MAX4075AOEUAIC OPAMP DUAL GAIN 9 R/R 8-UMAX |
951 | - |
|
Datasheet | GainAmp™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.1V/µs | 4 MHz | 90 kHz | 0.8 pA | 200 µV | 37µA (x2 Channels) | 22 mA | 2.5 V | 5.5 V | -40°C ~ 70°C | - | - | Surface Mount | 8-uMAX-EP|8-uSOP-EP |
|
|
MAX4274BJEUAIC OPAMP GAIN 49 R-TO-R 8-UMAX |
940 | - |
|
Datasheet | GainAmp™ | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.7V/µs | 2 MHz | 310 kHz | 50 pA | 500 µV | 330µA (x2 Channels) | 65 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-uMAX-EP|8-uSOP-EP |
|
MAX4274CAESAIC OPAMP GAIN 100 R-TO-R 8-SOIC |
889 | - |
|
Datasheet | GainAmp™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.7V/µs | 2 MHz | 230 kHz | 50 pA | 500 µV | 330µA (x2 Channels) | 65 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
