Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MXL1001ACN8IC OPAMP GP 1 CIRCUIT 8DIP |
774 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Not For New Designs | General Purpose | 1 | - | 0.25V/µs | 800 kHz | - | - | 10 µV | - | - | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
ICL7622ACPDIC CMOS 2 CIRCUIT 14DIP |
762 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 2 mV | 1mA (x2 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
MAX422MTVIC OPAMP CFA 1 CIRCUIT TO99-8 |
741 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Obsolete | CMOS, Chopper (Zero-Drift) | 1 | - | 0.5V/µs | 500 kHz | - | 10 pA | 1 µV | 1.3mA | 80 mA | 5 V | 33 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
MAX422CTVIC OPAMP CFA 1 CIRCUIT TO99-8 |
632 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | CMOS, Chopper (Zero-Drift) | 1 | - | 0.5V/µs | 500 kHz | - | 10 pA | 1 µV | 1.3mA | 80 mA | 5 V | 33 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
ICL7632ECSEIC CMOS 3 CIRCUIT 16SOIC |
625 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | CMOS | 3 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 20 mV | 1mA (x3 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
MAX448ACPDIC OPAMP GP 4 CIRCUIT 14DIP |
606 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 90V/µs | 100 MHz | - | 650 nA | 3 mV | 30mA (x4 Channels) | - | 6 V | 6 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
MAX4174BAEUKIC OPAMP GP 1 CIRCUIT SOT23-5 |
571 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 0.7V/µs | 2 MHz | 560 kHz | 50 pA | 500 µV | 330µA | 65 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
MAX448ACPD-2IC OPAMP GP 4 CIRCUIT 14DIP |
518 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | 90V/µs | 100 MHz | - | 650 nA | 3 mV | 30mA (x4 Channels) | - | 6 V | 6 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
MAX4275CAESAIC OPAMP GAIN 100 R-TO-R 8-SOIC |
515 | - |
|
Datasheet | GainAmp™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Discontinued at Digi-Key | General Purpose | 2 | Rail-to-Rail | 0.7V/µs | 2 MHz | 230 kHz | 50 pA | 500 µV | 355µA (x2 Channels) | 65 mA | 2.5 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ICL7632CCJEIC CMOS 3 CIRCUIT 16CERDIP |
427 | - |
|
Datasheet | - | 16-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 3 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 10 mV | 1mA (x3 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 16-CERDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
