Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
MAX4073HAUT-TIC CURRENT SENSE 1 CIRCUIT SOT6 |
1,395 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | - | - | 1.6 MHz | 40 µA | 1 mV | 500µA | - | 3 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-6 |
|
MAX4073FAXK-TIC CURR SENSE 1 CIRCUIT SC70-5 |
1,831 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | - | - | 1.7 MHz | 40 µA | 1 mV | 500µA | - | 3 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
|
MAX4253EBC-TIC OPAMP GP 2 CIRCUIT 12UCSP |
2,348 | - |
|
Datasheet | - | 10-WFBGA, CSPBGA | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Push-Pull, Rail-to-Rail | 0.3V/µs | 3 MHz | - | 0.1 pA | 70 µV | 420µA (x2 Channels) | 68 mA | 2.4 V | 5.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-UCSP |
|
MAX4322EUKIC OPAMP GP 1 CIRCUIT SOT23-5 |
9,106 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 2V/µs | 5 MHz | - | 50 nA | 1.2 mV | 725µA | 50 mA | 2.4 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
MAX4073FAUT-TIC CURRENT SENSE 1 CIRCUIT SOT6 |
1,163 | - |
|
Datasheet | - | SOT-23-6 | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | - | - | 1.7 MHz | 40 µA | 1 mV | 500µA | - | 3 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-6 |
|
MAX4476AUT#G16IC OPAMP GP 1 CIRCUIT SOT23-6 |
2,305 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Active | General Purpose | 1 | Push-Pull, Rail-to-Rail | 3V/µs | 10 MHz | - | 1 pA | 70 µV | 2.5mA | 48 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
ICL7631CCPEIC CMOS 3 CIRCUIT 16DIP |
2,801 | - |
|
Datasheet | - | 16-DIP (0.300", 7.62mm) | Tube | Obsolete | CMOS | 3 | Rail-to-Rail | 1.6V/µs | 1.4 MHz | - | 1 pA | 10 mV | 1mA (x3 Channels) | - | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 16-PDIP |
|
MAX4322EUK-G103IC OPAMP GP 1 CIRCUIT SOT23-5 |
1,062 | - |
|
Datasheet | - | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 2V/µs | 5 MHz | - | 50 nA | 1.2 mV | 725µA | 50 mA | 2.4 V | 6.5 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
MAX4488AUTIC OPAMP GP 1 CIRCUIT SOT23-6 |
364 | - |
|
Datasheet | - | SOT-23-6 | Bulk | Active | General Purpose | 1 | Push-Pull, Rail-to-Rail | 10V/µs | 42 MHz | - | 1 pA | 70 µV | 2.5mA | 48 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-6 |
|
MAX4486AKA+TIC OPAMP GP 2 CIRCUIT SOT23-8 |
15,734 | - |
|
Datasheet | - | SOT-23-8 | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 20V/µs | 7 MHz | - | 0.1 pA | 300 µV | 2.2mA (x2 Channels) | 33 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-8 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
