Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMP8270MAX/E7001108HIGH COMMON MODE, GAIN OF 20, PR |
7,150 | - |
|
Datasheet | * | - | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
LMV722MIC OPAMP GP 2 CIRCUIT 8SOIC |
1,497 | - |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 5.25V/µs | 10 MHz | - | 260 nA | 80 µV | 2.01mA (x2 Channels) | 52.6 mA | 2.2 V | 5.5 V | -40°C ~ 85°C (TJ) | Automotive | AEC-Q100 | Surface Mount | 8-SOIC |
|
LMC662AIMXIC CMOS 2 CIRCUIT 8SOIC |
3,437 | - |
|
Datasheet | LMC® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 750µA (x2 Channels) | 40 mA | 4.75 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Surface Mount | 8-SOIC |
|
LMV932MMIC OPAMP GP 2 CIRCUIT 8VSSOP |
2,000 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | General Purpose | 2 | Rail-to-Rail | 0.42V/µs | 1.5 MHz | - | 14 nA | 1 mV | 116µA (x2 Channels) | 100 mA | 1.8 V | 5.5 V | -40°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 8-VSSOP |
|
LMP2011MFXIC OPAMP GP 1 CIRCUIT SOT23-5 |
3,000 | - |
|
Datasheet | LMP® | SC-74A, SOT-753 | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 3 MHz | - | - | 0.12 µV | 930µA | 17 mA | 2.7 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LMP8276MAIC OPAMP DIFF 1 CIRCUIT 8SOIC |
3,005 | - |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Rail-to-Rail | 0.7V/µs | 80 kHz | - | 20 nA | 250 µV | 1mA | - | 4.75 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
LMP8276MA/NOPBIC OPAMP DIFF 1 CIRCUIT 8SOIC |
285 | - |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Rail-to-Rail | 0.7V/µs | 80 kHz | - | 20 nA | 250 µV | 1mA | - | 4.75 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LF298MXSAMPLE AND HOLD CIRCUIT, 1 FUNC, |
6,000 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Surface Mount | 14-SOIC |
|
LMC660CN/NOPBIC CMOS 4 CIRCUIT 14DIP |
262 | - |
|
Datasheet | LMC® | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.1V/µs | 1.4 MHz | - | 0.002 pA | 1 mV | 1.5mA (x4 Channels) | 40 mA | 4.75 V | 15.5 V | 0°C ~ 70°C | - | - | Through Hole | 14-PDIP |
|
|
LMH6658MAXIC VOLTAGE FEEDBACK 2 CIRC 8SOIC |
2,500 | - |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Voltage Feedback | 2 | Rail-to-Rail | 700V/µs | 140 MHz | 270 MHz | 5 µA | 1 mV | 6.5mA (x2 Channels) | 110 mA | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
