Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMV2011MAIC OPAMP GP 1 CIRCUIT 8SOIC |
1,303 | - |
|
Datasheet | LMV® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 3 MHz | - | 3 pA | 0.12 µV | 930µA | 17 mA | 2.7 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
|
LMP2231AMAIC OPAMP GP 1 CIRCUIT 8SOIC |
1,235 | - |
|
Datasheet | LMP® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 1 | Differential, Rail-to-Rail | 0.058V/µs | 130 kHz | - | 0.02 pA | 10 µV | 10µA | 30 mA | 1.6 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LMC6062INIC CMOS 2 CIRCUIT 8DIP |
818 | - |
|
Datasheet | LMC® | 8-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.035V/µs | 100 kHz | - | 0.01 pA | 100 µV | 40µA (x2 Channels) | 35 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-PDIP |
|
LMH6678LQIC OPAMP CFA 2 CIRCUIT 24WQFN |
8,000 | - |
|
Datasheet | LMH® | 24-WFQFN Exposed Pad | Bulk | Obsolete | Current Feedback | 2 | Differential | 700V/µs | - | 50 MHz | - | - | 33mA (x2 Channels) | 580 mA | 3.3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 24-WQFN (4x5) |
|
LMH6643MM-NSIC OPAMP VFB 2 CIRCUIT 8VSSOP |
73,910 | - |
|
Datasheet | LMH® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Bulk | Active | Voltage Feedback | 2 | Rail-to-Rail | 135V/µs | - | 130 MHz | 1.6 µA | 1 mV | 2.7mA (x2 Channels) | 75 mA | 2.7 V | 12.8 V | -40°C ~ 85°C | - | - | Surface Mount | 8-VSSOP |
|
LMC6484AIN/NOPBLMC6484 ULTRA-LOW BIAS CURRENT, |
281 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.02 pA | 110 µV | 2.6mA (x4 Channels) | 30 mA | 3 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 14-PDIP |
|
|
LM6171BINIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
6,679 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Voltage Feedback | 1 | - | 3600V/µs | 100 MHz | 160 MHz | 1 µA | 1.5 mV | 2.5mA | 116 mA | 5.5 V | 34 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LMC6492BEMIC CMOS 2 CIRCUIT 8SOIC |
8,922 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | CMOS | 2 | Differential, Rail-to-Rail | 1.3V/µs | 1.5 MHz | - | 0.15 pA | 110 µV | 1.3mA (x2 Channels) | 30 mA | 2.5 V | 15.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
LF411CHIC OPAMP JFET 1 CIRCUIT TO99-8 |
2,905 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 15V/µs | 3 MHz | - | 50 pA | 800 µV | 2mA | - | 7 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
CLC5801IMXIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
8,919 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | - | 300V/µs | 1.8 GHz | 420 MHz | 12 µA | 100 µV | 16mA | - | - | - | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
