Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LMH6550MAIC OPAMP DIFF 1 CIRCUIT 8SOIC |
326 | - |
|
Datasheet | LMH® | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Differential | 1 | Differential | 3000V/µs | - | 400 MHz | 8 µA | 1 mV | 20mA | 75 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LM6154BCMIC OPAMP GP 4 CIRCUIT 14SOIC |
713 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 30V/µs | 80 MHz | - | 500 nA | 300 µV | 1.6mA (x4 Channels) | 16.9 mA | 2.7 V | 24 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SOIC |
|
LM611AMNIC OPAMP GP 1 CIRCUIT 8MDIP |
294 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.7V/µs | 800 kHz | - | 10 nA | 3.5 mV | 210µA | 25 mA | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-MDIP |
|
|
LM6144BIMX-NSIC OPAMP GP 4 CIRCUIT 14SOIC |
7,500 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | General Purpose | 4 | Rail-to-Rail | 25V/µs | 18 MHz | - | 174 nA | 1.3 mV | 750µA (x4 Channels) | 22 mA | 1.8 V | 24 V | -40°C ~ 85°C (TA) | - | - | Surface Mount | 14-SOIC |
|
LM6104MIC OPAMP CFA 4 CIRCUIT 14SOIC |
1,201 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 4 | - | 100V/µs | 7.5 MHz | - | 5 µA | 10 mV | 3.5mA (x4 Channels) | - | 4.75 V | 24 V | -20°C ~ 80°C | - | - | Surface Mount | 14-SOIC |
|
LF198AHSAMPLE AND HOLD CIRCUIT, 1 FUNC, |
2,223 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Through Hole | TO-99-8 |
|
LM324JLM324-N-MIL LOW POWER QUAD OPERA |
1,800 | - |
|
Datasheet | LinCMOS™ | 14-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 4 | - | - | 1 MHz | - | 45 nA | 2 mV | 1.5mA | 40 mA | 3 V | 32 V | 0°C ~ 70°C (TJ) | - | - | Through Hole | 14-CDIP |
|
|
LM6118NIC OPAMP GP 2 CIRCUIT 8MDIP |
395 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 100V/µs | 17 MHz | - | 200 nA | 200 µV | 5.5mA (x2 Channels) | 100 mA | 10 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | 8-MDIP |
|
|
LM158HLM158-N LOW POWER DUAL OPERATION |
209 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 2 | - | - | 1 MHz | - | 40 nA | 2 mV | 1mA | 40 mA | 3 V | 32 V | -55°C ~ 125°C | Automotive | AEC-Q100 | Through Hole | TO-99-8 |
|
LMC6084AMNIC CMOS 4 CIRCUIT 14DIP |
783 | - |
|
Datasheet | LMC® | 14-DIP (0.300", 7.62mm) | Bulk | Active | CMOS | 4 | Push-Pull, Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.01 pA | 150 µV | 2.2mA (x4 Channels) | 34 mA | 4.5 V | 15.5 V | -55°C ~ 125°C | - | - | Through Hole | 14-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
