Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PGA205AUPGA205 PROGRAMMABLE GAIN INSTRUM |
3,118 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Active | Instrumentation | 1 | - | 0.7V/µs | - | 1 MHz | 500 pA | 25 µV | 5.2mA | 23 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LF256HLF256 - JFET INPUT OPERATIONAL A |
1,968 | - |
|
Datasheet | BI-FET™ | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 12V/µs | 5 kHz | - | 30 pA | 3 mV | 5mA | - | 10 V | 44 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
LMC6001BIHIC OPAMP GP 1 CIRCUIT TO99-8 |
1,462 | - |
|
Datasheet | LMC® | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | Rail-to-Rail | 1.5V/µs | 1.3 MHz | - | 0.025 pA | 10 mV | 550µA | 34 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | TO-99-8 |
|
CLC401AJIC OPAMP CFA 1 CIRCUIT 8CDIP |
115 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Tube | Active | Current Feedback | 1 | - | 800V/µs | - | 100 MHz | 30 µA | 6 mV | - | 70 mA | 10 V | 10 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 8-CDIP |
|
LM709AW/883IC OPAMP GP 1 CIRCUIT 10CFP |
227 | - |
|
Datasheet | - | 10-CFlatPack | Bulk | Active | General Purpose | 1 | - | 0.2V/µs | 250 kHz | - | 500 nA | 3 mV | - | - | 36 V | 36 V | -55°C ~ 125°C | - | - | Surface Mount | 10-CFP |
|
LM124W/883IC OPAMP GP 4 CIRCUIT 14CFP |
962 | - |
|
Datasheet | - | 14-CFlatPack | Bulk | Active | General Purpose | 4 | Differential | 0.5V/µs | 1.2 MHz | - | 20 nA | 3 mV | 1.4mA (x4 Channels) | 30 mA | 3 V | 30 V | -55°C ~ 125°C (TA) | Automotive | AEC-Q100 | Surface Mount | 14-CFP |
|
|
CLC409AJ-QMLIC OPAMP CFA 1 CIRCUIT 8CDIP |
769 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Current Feedback | 1 | - | 1200V/µs | - | 350 MHz | 10 µA | 500 µV | 13.5mA | 60 mA | 7 V | 7 V | -40°C ~ 85°C (TA) | - | - | Through Hole | 8-CDIP |
|
CLC431AJ-QMLIC OPAMP CFA 2 CIRCUIT 14CERDIP |
329 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | Current Feedback | 2 | - | 2000V/µs | - | 720 MHz | 2 µA | 2 mV | 7.1mA (x2 Channels) | 60 mA | 16.5 V | 16.5 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CERDIP |
|
LMC6042AIJIC CMOS 2 CIRCUIT 8CDIP |
139 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | CMOS | 2 | Push-Pull, Rail-to-Rail | 0.02V/µs | 100 kHz | - | 0.002 pA | 1 mV | 26µA (x2 Channels) | 40 mA | 4.5 V | 15.5 V | -40°C ~ 85°C (TJ) | - | - | Through Hole | 8-CDIP |
|
|
CLC415AJ-QMLIC OPAMP CFA 4 CIRCUIT 14CERDIP |
154 | - |
|
Datasheet | - | 14-CDIP (0.300", 7.62mm) | Bulk | Active | Current Feedback | 4 | - | 1200V/µs | - | - | 25 µA | 10 mV | - | 70 mA | 10 V | 10 V | -55°C ~ 125°C (TA) | - | - | Through Hole | 14-CERDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
