Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ICL7650SCPA-1ZIC OPAMP ZERO-DRIFT 1 CIRC 8DIP |
2,270 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Zero-Drift | 1 | - | 2.5V/µs | 2 MHz | - | 4 pA | 700 µV | 2mA | 30 mA | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
CA3420EZIC OPAMP GP 1 CIRCUIT 8DIP |
767 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.5V/µs | 500 kHz | - | 0.05 pA | 5 mV | 450µA | 2.6 mA | 2 V | 20 V | -55°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
HA9P5127-5ZIC OPAMP GP 1 CIRCUIT 8SOIC |
5,991 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 10V/µs | 8.5 MHz | - | 15 nA | 30 µV | 3.5mA | 25 mA | 10 V | 30 V | 0°C ~ 75°C | - | - | Surface Mount | 8-SOIC |
|
ISL28633FVZ-T7AIC OPAMP ZER-DRIFT 1CIRC 14TSSOP |
149 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.8V/µs | 2.3 MHz | - | 50 pA | 0.2 µV | 3mA | 45 mA | 2.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
|
HA3-2525-5ZIC OPAMP GP 1 CIRCUIT 8DIP |
488 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 120V/µs | 20 MHz | - | 125 nA | 5 mV | 4mA | 20 mA | 8 V | 36 V | 0°C ~ 75°C | - | - | Through Hole | 8-PDIP |
|
ICL7650SCBA-1ZIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
2,413 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 1 | - | 2.5V/µs | 2 MHz | - | 4 pA | 0.7 µV | 2mA | 30 mA | 4.5 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
ISL28113FEZ-T7IC OPAMP GP 1 CIRCUIT SC70-5 |
4,752 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 1V/µs | 2 MHz | - | 3 pA | 500 µV | 90µA | 22 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-5 |
|
|
ISL28177FBZIC OPAMP GP 1 CIRCUIT 8SOIC |
3,846 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 1 | - | 0.2V/µs | 600 kHz | - | 200 pA | 150 µV | 1.18mA | 30 mA | 6 V | 40 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
ISL28213FBZIC OPAMP GP 2 CIRCUIT 8SOIC |
2,954 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | General Purpose | 2 | Rail-to-Rail | 1V/µs | 2 MHz | - | 3 pA | 500 µV | 90µA (x2 Channels) | 22 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
READ2302GSP#GC3IC CMOS 2 CIRCUIT 8TSSOP |
7,435 | - |
|
Datasheet | - | 8-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | - | 8V/µs | 6 MHz | - | 1 pA | 6 mV | 750µA | - | 2.5 V | 5.5 V | -40°C ~ 105°C (TA) | - | - | Surface Mount | 8-TSSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
