Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ISL28005FH50Z-T7IC CURR SENSE 1 CIRCUIT SOT23-5 |
4,689 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.67V/µs | - | 160 kHz | 4.7 µA | 1.2 mV | 50µA | 8.7 mA | 2.7 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
ICL7612DCPAZIC OPAMP GP 1 CIRCUIT 8DIP |
4,929 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 1.6V/µs | 1.4 MHz | - | 1 pA | 15 mV | 1mA | 40 mA | 2 V | 16 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
ISL28233FRZIC OPAMP ZERO-DRIFT 2 CIRC 8DFN |
931 | - |
|
Datasheet | - | 8-VDFN Exposed Pad | Tube | Active | Zero-Drift | 2 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 180 pA | 2 µV | 18µA (x2 Channels) | 19 mA | 1.8 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | 8-DFN (3x3) |
|
|
ISL28133FHZ-T7IC OPAMP ZER-DRIFT 1CIRC SOT23-5 |
4,958 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.2V/µs | 400 kHz | - | 30 pA | 2 µV | 18µA | 26 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
ISL28005FH50Z-T7AIC CURR SENSE 1 CIRCUIT SOT23-5 |
12,193 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.67V/µs | - | 160 kHz | 4.7 µA | 1.2 mV | 50µA | 8.7 mA | 2.7 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
ISL28005FH20Z-T7AIC CURR SENSE 1 CIRCUIT SOT23-5 |
1,215 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.67V/µs | - | 180 kHz | 4.7 µA | 1.2 mV | 50µA | 8.7 mA | 2.7 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
ISL28005FH100Z-T7AIC CURR SENSE 1 CIRCUIT SOT23-5 |
330 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.76V/µs | - | 110 kHz | 4.7 µA | 1.2 mV | 50µA | 8.7 mA | 2.7 V | 28 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
ICL7611DCBAZ-TIC OPAMP GP 1 CIRCUIT 8SOIC |
4,367 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 1.6V/µs | 1.4 MHz | - | 1 pA | 15 mV | 1mA | 40 mA | 2 V | 16 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
ISL28210FBZIC OPAMP JFET 2 CIRCUIT 8SOIC |
661 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 2 | - | 20V/µs | 12.5 MHz | - | 0.3 pA | 300 µV | 2.55mA (x2 Channels) | 50 mA | 9 V | 40 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
ISL1571IRZ-T7IC OPAMP GP 2 CIRCUIT 16QFN |
1,805 | - |
|
Datasheet | - | 16-TFQFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 2 | Differential | 1200V/µs | - | 250 MHz | 7 µA | 40 mV | 15mA (x2 Channels) | 1 A | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 16-QFN (4x4) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
