Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8510ARZIC OPAMP JFET 1 CIRCUIT 8SOIC |
5,196 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | J-FET | 1 | - | 20V/µs | 8 MHz | - | 25 pA | 100 µV | 2.2mA | 70 mA | 9 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
ADA4891-2WARMZ-R7IC CMOS 2 CIRCUIT 8MSOP |
1,383 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 210V/µs | 105 MHz | 90 MHz | 2 pA | 2.5 mV | 4.4mA (x2 Channels) | 125 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
OP777ARMZIC OPAMP GP 1 CIRCUIT 8MSOP |
9,668 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | General Purpose | 1 | Rail-to-Rail | 0.2V/µs | 700 kHz | - | 5 nA | 30 µV | 300µA | 30 mA | 2.7 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
AD8038AKSZ-REEL7IC OPAMP VFB 1 CIRCUIT SC70-5 |
4,750 | - |
|
Datasheet | - | 5-TSSOP, SC-70-5, SOT-353 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 425V/µs | - | 350 MHz | 400 nA | 500 µV | 1mA | - | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SC-70-5 |
|
AD8029AKSZ-REELIC OPAMP GP 1 CIRCUIT SC70-6 |
4,180 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 63V/µs | - | 125 MHz | 1.7 µA | 2 mV | 1.4mA | 170 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-6 |
|
|
AD8029AKSZ-REEL7IC OPAMP GP 1 CIRCUIT SC70-6 |
3,100 | - |
|
Datasheet | - | 6-TSSOP, SC-88, SOT-363 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 63V/µs | - | 125 MHz | 1.7 µA | 2 mV | 1.4mA | 170 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SC-70-6 |
|
LT6003HS5#TRMPBFIC OPAMP GP 1 CIRCUIT TSOT23-5 |
3,250 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.0013V/µs | 3 kHz | - | 40 pA | 185 µV | 1.25µA | 9 mA | 1.6 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
LT6000IDCB#TRMPBFIC OPAMP GP 1 CIRCUIT 6DFN |
18,500 | - |
|
Datasheet | - | 6-WFDFN Exposed Pad | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 0.018V/µs | 60 kHz | - | 4 nA | 500 µV | 20µA | 10 mA | 1.8 V | 16 V | -40°C ~ 85°C | - | - | Surface Mount | 6-DFN (2x3) |
|
|
AD8237ARMZ-R7IC INST AMP 1 CIRCUIT 8MSOP |
2,852 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 0.15V/µs | - | 200 kHz | 250 pA | 25 µV | 115µA | 4 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
AD8237ARMZIC INST AMP 1 CIRCUIT 8MSOP |
2,546 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Instrumentation | 1 | Rail-to-Rail | 0.15V/µs | - | 200 kHz | 250 pA | 25 µV | 115µA | 4 mA | 1.8 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
