Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4666-2ACPZ-R7IC CMOS 2 CIRCUIT 8LFCSP |
1,824 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad, CSP | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 2V/µs | 4 MHz | 2.1 MHz | 0.5 pA | 500 µV | 630µA (x2 Channels) | 220 mA | 3 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP-WD (3x3) |
|
AD8519ARTZ-REEL7IC OPAMP GP 1 CIRCUIT SOT23-5 |
3,350 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 2.9V/µs | 8 MHz | - | 300 nA | 600 µV | 600µA | 25 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
LT6106HS5#TRMPBFIC CURR SENSE 1 CIRCUIT TSOT23-5 |
28,569 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 200 kHz | 40 nA | 150 µV | 70µA | 1 mA | 2.7 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
ADA4661-2ARMZIC CMOS 2 CIRCUIT 8MSOP |
20,191 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | CMOS | 2 | Rail-to-Rail | 2V/µs | 4 MHz | 2.1 MHz | 0.5 pA | 30 µV | 630µA (x2 Channels) | 220 mA | 3 V | 18 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
AD8418ABRMZ-RLIC CURRENT SENSE 1 CIRCUIT 8MSOP |
6,394 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 1V/µs | - | 250 kHz | 130 µA | - | 4.1mA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
ADA4610-1ARJZ-R7IC OPAMP JFET 1 CIRCUIT SOT23-5 |
6,302 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | J-FET | 1 | Rail-to-Rail | 61V/µs | 16.3 MHz | 9.5 MHz | 5 pA | 400 µV | 1.6mA | 79 mA | 9 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | SOT-23-5 |
|
|
AD8418ABRMZIC CURRENT SENSE 1 CIRCUIT 8MSOP |
3,965 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Current Sense | 1 | - | 1V/µs | - | 250 kHz | 130 µA | - | 4.1mA | - | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
|
AD8057ARTZ-REEL7IC OPAMP VFB 1 CIRCUIT SOT23-5 |
1,224 | - |
|
Datasheet | - | SC-74A, SOT-753 | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1150V/µs | - | 325 MHz | 500 nA | 1 mV | 6mA | - | 3 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | SOT-23-5 |
|
|
LT6106HS5#TRPBFIC CURR SENSE 1 CIRCUIT TSOT23-5 |
143 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | 200 kHz | 40 nA | 150 µV | 70µA | 1 mA | 2.7 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
OP07CPZIC OPAMP GP 1 CIRCUIT 8DIP |
16,482 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 1 | - | 0.3V/µs | - | - | 1.8 nA | 60 µV | - | - | 6 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
