Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8555ACP-REEL7IC AMP CHOPPER 2MHZ 10MA 16LFCSP |
14,278 | - |
|
Datasheet | DigiTrim® | 16-VQFN Exposed Pad, CSP | Bulk | Obsolete | Chopper (Zero-Drift) | 1 | - | 1.2V/µs | 2 MHz | - | 16 nA | 2 µV | 2mA | 10 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP-VQ (4x4) |
|
AD8651ARM-R2IC OPAMP VF CMOS 50MHZ LN 8MSOP |
4,618 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 41V/µs | 50 MHz | - | 1 pA | 100 µV | 9.5mA | 40 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
AD622ANIC AMP INST LP 18MA 8DIP |
343 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | - | 1.2V/µs | - | 1 MHz | 2 nA | 60 µV | 900µA | 18 mA | 5.2 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
OP297FZIC OPAMP GP 2 CIRCUIT 8CERDIP |
16,240 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.15V/µs | 500 kHz | - | 35 pA | 50 µV | 525µA (x2 Channels) | - | 4 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
AD8099ACPZ-R2IC OPAMP VFB 1 CIRCUIT 8LFCSP |
2,132 | - |
|
Datasheet | - | 8-VFDFN Exposed Pad, CSP | Tape & Reel (TR) | Discontinued at Digi-Key | Voltage Feedback | 1 | - | 1350V/µs | - | 510 MHz | 6 µA | 100 µV | 15mA | 178 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP (3x3) |
|
OP482ACBZ-R7IC OPAMP JFET 4MHZ RRO 14WLCSP |
7,218 | - |
|
Datasheet | - | 14-UFBGA, WLCSP | Bulk | Active | J-FET | 4 | - | 9V/µs | 4 MHz | - | 3 pA | 200 µV | 210µA (x4 Channels) | 10 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-WLCSP (1.128x2.123) |
|
|
AD623BNIC AMP INST R-R LP 8DIP |
5,211 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Instrumentation | 1 | Rail-to-Rail | 0.3V/µs | - | 800 kHz | 17 nA | 25 µV | 375µA | - | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
AD8099ACP-R2IC OPAMP VF ULN ULDIST 8LFCSP |
4,588 | - |
|
Datasheet | - | 8-VFDFN Exposed Pad, CSP | Cut Tape (CT) | Obsolete | Voltage Feedback | 1 | - | 1350V/µs | - | 510 MHz | 6 µA | 100 µV | 15mA | 178 mA | 5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-LFCSP (3x3) |
|
|
AD548AQIC OPAMP GP 1 CIRCUIT 8CERDIP |
22,556 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.8V/µs | 1 MHz | - | - | - | 170µA | 15 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
PM156J/883CIC OPAMP JFET 1 CIRCUIT TO99-8 |
448 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 12V/µs | 5 MHz | - | 30 nA | 1 mV | 2mA | 50 mA | 44 V | 44 V | -55°C ~ 125°C | Military | MIL-STD-883 | Through Hole | TO-99-8 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
