Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD848JRIC OPAMP GP 1 CIRCUIT 8SOIC |
2,289 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | - | 300V/µs | 175 MHz | - | 3.3 µA | 200 µV | 5.1mA | 32 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SOIC |
|
AD8002ARMIC OPAMP CF DUAL LP LDIST 8MSOP |
5,876 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 1200V/µs | - | 600 MHz | 5 µA | 2 mV | 10mA (x2 Channels) | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
OP43BJIC OPAMP JFET 1 CIRCUIT TO99-8 |
1,087 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | - | - | - | - | - | - | - | 10 V | 40 V | -55°C ~ 125°C (TA) | - | - | Through Hole | TO-99-8 |
|
|
AD8220WARMZ-RLIC INST AMP 1 CIRCUIT 8MSOP |
2,742 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | Rail-to-Rail | 2V/µs | - | 1.5 MHz | 25 pA | 250 µV | 750µA | 15 mA | 4.5 V | 36 V | -40°C ~ 125°C | Automotive | - | Surface Mount | 8-MSOP |
|
|
AD8055ARZ-REELIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
1,561 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Voltage Feedback | 1 | - | 1400V/µs | - | 300 MHz | 400 nA | 3 mV | 5.4mA | 60 mA | 8 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
AD8015AR-REEL7IC DIFF/TRANSIMPEDNC 1CIRC 8SOIC |
230 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Active | Transimpedance | 1 | Differential | - | 240 MHz | - | - | - | 25mA | - | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LTC2050HVMPS6#TRPBFIC OPAMP ZER-DRIFT 1CIR TSOT23-6 |
1,807 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 2V/µs | 3 MHz | - | 25 pA | 0.5 µV | 1mA | - | 2.7 V | 11 V | -55°C ~ 150°C | - | - | Surface Mount | TSOT-23-6 |
|
AD8054AR-REELIC OPAMP VFB 4 CIRCUIT 14SOIC |
3,323 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Voltage Feedback | 4 | Rail-to-Rail | 190V/µs | - | 160 MHz | 2 µA | 1.8 mV | 2.875mA (x4 Channels) | 30 mA | 3 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
OP16GN8#PBFIC OPAMP JFET 1 CIRCUIT 8DIP |
111 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 16V/µs | 7.2 MHz | - | 60 pA | 500 µV | 4.8mA | - | 20 V | 30 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
OP481GSZ-REELIC OPAMP GP 4 CIRCUIT 14SOIC |
4,007 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.028V/µs | 105 kHz | - | 3 nA | 100 µV | 3.3µA (x4 Channels) | 12 mA | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
