Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD840KNIC OPAMP GP 1 CIRCUIT 14DIP |
2,546 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 400V/µs | 400 MHz | - | 3.5 µA | 100 µV | 12mA | 50 mA | 10 V | 36 V | 0°C ~ 75°C | - | - | Through Hole | 14-PDIP |
|
AD8133ACPZ-REELIC OPAMP DIFF 3 CIRCUIT 24LFCSP |
4,095 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Differential | 3 | Differential | 1600V/µs | - | 450 MHz | 67 µA | 6 mV | 28mA | 90 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 24-LFCSP-WQ (4x4) |
|
|
AD8133ACP-R2IC OPAMP DIFF TRPL LDIST 24LFCSP |
12,750 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad, CSP | Bulk | Obsolete | Differential | 3 | Differential | 1600V/µs | - | 450 MHz | 67 µA | 6 mV | 28mA | 90 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 24-LFCSP-WQ (4x4) |
|
|
AD8134ACP-R2IC OPAMP DIFF TRPL LDIST 24LFCSP |
6,950 | - |
|
Datasheet | - | 24-WFQFN Exposed Pad, CSP | Bulk | Active | Differential | 3 | Differential | 1600V/µs | - | 450 MHz | 67 µA | 4 mV | 31mA | 90 mA | 4.5 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 24-LFCSP-WQ (4x4) |
|
LT1672IMS8#PBFIC OPAMP GP 1 CIRCUIT 8MSOP |
3,123 | - |
|
Datasheet | Over-The-Top® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA | 1.5 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
AD8054ARUIC OPAMP VFB 4 CIRCUIT 14TSSOP |
2,330 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Voltage Feedback | 4 | Rail-to-Rail | 190V/µs | - | 160 MHz | 2 µA | 1.8 mV | 2.875mA (x4 Channels) | 30 mA | 3 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
SSM2135SIC AUDIO 1 CIRCUIT 8SOIC |
3,304 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Audio | 1 | - | 0.9V/µs | 3.5 MHz | - | 300 nA | 200 µV | 3.7mA | 30 mA | 4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
ADOP07CQIC OPAMP GP 1 CIRCUIT 8CERDIP |
348 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.17V/µs | - | - | 1.8 nA | 60 µV | 3.5mA | - | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
AD848JNIC OPAMP GP 175MHZ LP 32MA 8DIP |
3,705 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 1 | - | 300V/µs | 175 MHz | - | 3.3 µA | 200 µV | 5.1mA | 32 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
|
LT1787HVCS8#TRPBFIC CURRENT SENSE 1 CIRCUIT 8SO |
7,500 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | - | - | 40 µV | 60µA | 50 µA | 2.5 V | 60 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
