Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD741LNIC OPAMP GP 1 CIRCUIT 8DIP |
496 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | - | 1 MHz | 2 nA | 200 µV | 1.7mA | 25 mA | 10 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1807IMS8#TRPBFIC OPAMP GP 2 CIRCUIT 8MSOP |
2,376 | - |
|
Datasheet | LT® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 140V/µs | 325 MHz | - | 1 µA | 100 µV | 9mA (x2 Channels) | 85 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
PM208AZIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,145 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | - | - | - | 800 pA | 700 µV | 300µA | - | 6 V | 40 V | -25°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
OP44FJIC OPAMP JFET 1 CIRCUIT TO99 |
987 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 100V/µs | 23 MHz | - | 130 pA | 400 µV | 6.5mA | - | 16 V | 40 V | -25°C ~ 85°C | - | - | Through Hole | TO-99 |
|
OP05EPIC INST AMP 1 CIRCUIT 8DIP |
4,184 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 0.3V/µs | - | 600 kHz | 1.2 nA | 250 µV | - | - | 6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
OP22FJIC OPAMP GP 1 CIRCUIT TO99-8 |
2,595 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 0.08V/µs | - | - | 4.5 nA | 100 µV | 15µA | - | 3 V | 30 V | -25°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
OP08GZIC OPAMP GP 1 CIRCUIT 8CERDIP |
876 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.12V/µs | 800 kHz | - | 1 nA | 250 µV | - | - | 36 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-CERDIP |
|
|
OP06EZIC INST AMP 1 CIRCUIT 8CERDIP |
414 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 100V/µs | - | - | - | - | - | - | 6 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
LT1498HS8#TRPBFIC OPAMP GP 2 CIRCUIT 8SO |
2,204 | - |
|
Datasheet | LT® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 6V/µs | 10.5 MHz | - | 250 nA | 200 µV | 1.8mA (x2 Channels) | 30 mA | 2.2 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
AD518JN/+IC OPAMP GP 1 CIRCUIT 8DIP |
994 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 70V/µs | 12 MHz | - | 120 nA | 2 mV | 5µA | 10 mA | 10 V | 10 V | -55°C ~ 70°C | - | - | Through Hole | 8-PDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
