Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OP491GRU-REELIC OPAMP GP 4 CIRCUIT 14TSSOP |
4,213 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.5V/µs | 3 MHz | - | 30 nA | 80 µV | 260µA (x4 Channels) | 16 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
AD844JR-16-REEL7IC OPAMP CF 60MHZ 80MA 16SOIC |
372 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Bulk | Obsolete | Current Feedback | 1 | - | 2000V/µs | - | 60 MHz | 200 pA | 50 µV | 6.5mA | 80 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
LTC6246CS6#TRMPBFIC OPAMP GP 1 CIRCUIT TSOT23-6 |
3,404 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Last Time Buy | General Purpose | 1 | Rail-to-Rail | 90V/µs | 180 MHz | 120 MHz | 400 nA | 100 µV | 1.25mA | - | 2.5 V | 5.25 V | 0°C ~ 70°C | - | - | Surface Mount | TSOT-23-6 |
|
AD8015ARIC TRANSIMPEDANCE 1 CIRC 8SOIC |
4,302 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Transimpedance | 1 | Differential | - | 240 MHz | - | - | - | 25mA | - | 4.5 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD8651ARMZ-R2IC OPAMP VF CMOS 50MHZ LN 8MSOP |
2,382 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Cut Tape (CT) | Obsolete | Voltage Feedback | 1 | Rail-to-Rail | 41V/µs | 50 MHz | - | 1 pA | 100 µV | 9.5mA | 40 mA | 2.7 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
LTC2050HS5#TRPBFIC OPAMP ZER-DRIFT 1CIR TSOT23-5 |
3,538 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 2V/µs | 3 MHz | - | 25 pA | 0.5 µV | 800µA | - | 2.7 V | 6 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-5 |
|
AD642JHIC OPAMP JFET 2 CIRCUIT TO99-8 |
29,133 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 3V/µs | - | 50 kHz | 35 pA | 2 mV | - | 25 mA | - | - | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
AD8010ANIC OPAMP CF 200MA LP 8DIP |
25,313 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Current Feedback | 1 | - | 800V/µs | - | 230 MHz | 10 µA | 5 mV | 15.5mA | 200 mA | 9 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
AD8010AR-REEL7IC OPAMP CF 200MA LP 8SOIC |
8,944 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Current Feedback | 1 | - | 800V/µs | - | 230 MHz | 10 µA | 5 mV | 15.5mA | 200 mA | 9 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
LTC2050HVIS8#TRPBFIC OPAMP ZERO-DRIFT 1 CIRC 8SO |
4,111 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 2V/µs | 3 MHz | - | 25 pA | 0.5 µV | 1mA | - | 2.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
