Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADN2890ACPZ-RLIC LIMITING 1 CIRCUIT 16LFCSP |
4,697 | - |
|
Datasheet | - | 16-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Obsolete | Limiting | 1 | Differential | - | - | - | - | 100 µV | 39mA | - | 3 V | 3.6 V | -40°C ~ 85°C | - | - | Surface Mount | 16-LFCSP-WQ (3x3) |
|
AD8513AR-REELIC OPAMP JFET 4 CIRCUIT 14SOIC |
4,637 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 20V/µs | 8 MHz | - | 25 pA | 100 µV | 2.2mA (x4 Channels) | 70 mA | 10 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
AD8698ARMZ-REELIC OPAMP GP 2 CIRCUIT 8MSOP |
4,097 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 2 | Rail-to-Rail | 0.4V/µs | 1 MHz | - | 700 pA | 20 µV | 2.8mA | - | 5 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
AD8556ARZ-REELIC OPAMP ZERO-DRIFT 1 CIRC 8SOIC |
1,572 | - |
|
Datasheet | DigiTrim® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Zero-Drift | 1 | - | 1.2V/µs | 2 MHz | - | 49 nA | 2 µV | 2mA | 10 mA | 4.5 V | 5.5 V | -40°C ~ 140°C | - | - | Surface Mount | 8-SOIC |
|
|
AD8662ARZ-REELIC CMOS 2 CIRCUIT 8SOIC |
2,571 | - |
|
Datasheet | DigiTrim® | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 2 | Rail-to-Rail | 3.5V/µs | 4 MHz | - | 0.3 pA | 50 µV | 1.25mA (x2 Channels) | 140 mA | 5 V | 16 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
OP07ZIC OPAMP GP 1 CIRCUIT 8CERDIP |
11,671 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.3V/µs | 600 kHz | - | 1.8 nA | 60 µV | - | - | 6 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
|
AD745JNIC OPAMP JFET 1 CIRCUIT 8DIP |
4,922 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 12V/µs | 20 MHz | 20 MHz | 150 pA | 250 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LTC6261HS6#TRMPBFIC OPAMP GP 1 CIRCUIT TSOT23-6 |
580 | - |
|
Datasheet | - | SOT-23-6 Thin, TSOT-23-6 | Tape & Reel (TR) | Last Time Buy | General Purpose | 1 | Rail-to-Rail | 7V/µs | 30 MHz | - | 50 nA | 50 µV | 245µA | 40 mA | 1.8 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | TSOT-23-6 |
|
|
AD706KNIC OPAMP GP 2 CIRCUIT 8DIP |
308 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.15V/µs | 800 kHz | - | 50 pA | 30 µV | 750µA | 15 mA | 4 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LTC6259IMS8#PBFIC OPAMP GP 2 CIRCUIT 8MSOP |
4,466 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 0.24V/µs | 1.3 MHz | - | 5 nA | 100 µV | 20µA (x2 Channels) | 10 mA | 1.8 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
