Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8574ARUIC OPAMP ZER-DRIFT 4CIRC 14TSSOP |
4,512 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tube | Obsolete | Zero-Drift | 4 | Rail-to-Rail | 0.4V/µs | 1.5 MHz | - | 1 nA | 1 µV | 850µA (x4 Channels) | 30 mA | 2.7 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
AD648BHIC OPAMP JFET 2 CIRCUIT TO99-8 |
807 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 1.8V/µs | 1 MHz | 1 MHz | 3 pA | 300 µV | 340µA (x2 Channels) | 15 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | TO-99-8 |
|
|
OP462HRU-REELIC OPAMP GP 4 CIRCUIT 14TSSOP |
2,567 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Obsolete | General Purpose | 4 | Rail-to-Rail | 13V/µs | 15 MHz | - | 260 nA | 1 mV | 550µA (x4 Channels) | 30 mA | 2.7 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 14-TSSOP |
|
LTC2052CGN#TRPBFIC OPAMP ZERO-DRIFT 4CIRC 16SSOP |
3,429 | - |
|
Datasheet | - | 16-SSOP (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Chopper (Zero-Drift) | 4 | Rail-to-Rail | 2V/µs | 3 MHz | - | 90 pA | 1 µV | 1mA (x4 Channels) | - | 2.7 V | 5.5 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SSOP |
|
AD8037ANZIC VOLTAGE FEEDBACK 1 CIRC 8DIP |
1,451 | - |
|
Datasheet | CLAMPIN™ | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | Voltage Feedback | 1 | - | 1500V/µs | - | 270 MHz | 3 µA | 2 mV | 18.5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LTC2050CS8IC OPAMP ZERO-DRIFT 1 CIRC 8SO |
453 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Active | Zero-Drift | 1 | Rail-to-Rail | 2V/µs | 3 MHz | - | 75 pA | 0.5 µV | 800µA | - | 2.7 V | 6 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LTC2054MPS5#TRPBFIC OPAMP ZER-DRIFT 1CIR TSOT23-5 |
3,965 | - |
|
Datasheet | - | SOT-23-5 Thin, TSOT-23-5 | Tape & Reel (TR) | Active | Zero-Drift | 1 | Rail-to-Rail | 0.5V/µs | 500 kHz | - | 1 pA | 0.5 µV | 145µA | - | 2.7 V | 6 V | -55°C ~ 150°C | - | - | Surface Mount | TSOT-23-5 |
|
AD8139ARDIC OPAMP DIFF 1 CIRCUIT 8SOIC |
3,483 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tube | Obsolete | Differential | 1 | Differential, Rail-to-Rail | 800V/µs | - | 410 MHz | 2.25 µA | 150 µV | 24.5mA | 100 mA | 4.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC-EP |
|
|
AD8139ARD-REELIC OPAMP DIFF 1 CIRCUIT 8SOIC |
1,495 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) Exposed Pad | Tape & Reel (TR) | Obsolete | Differential | 1 | Differential, Rail-to-Rail | 800V/µs | - | 410 MHz | 2.25 µA | 150 µV | 24.5mA | 100 mA | 4.5 V | 12 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC-EP |
|
|
LTC6226IS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
662 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Last Time Buy | General Purpose | 1 | Rail-to-Rail | 180V/µs | 420 MHz | 330 MHz | 8.4 µA | 20 µV | 5.5mA | 64 mA | 2.8 V | 11.75 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
