Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTC6263IMS#PBFIC OPAMP GP 4 CIRCUIT 16MSOP |
267 | - |
|
Datasheet | - | 16-TFSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 4 | Rail-to-Rail | 7V/µs | 30 MHz | - | 10 nA | 50 µV | 245µA (x4 Channels) | 40 mA | 1.8 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-MSOP |
|
|
LTC6260IMS#PBFIC OPAMP GP 4 CIRCUIT 16MSOP |
3,208 | - |
|
Datasheet | - | 16-TFSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 4 | Rail-to-Rail | 0.24V/µs | 1.3 MHz | - | 5 nA | 100 µV | 20µA (x4 Channels) | 10 mA | 1.8 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-MSOP |
|
LT1806IS8#TRPBFIC OPAMP GP 1 CIRCUIT 8SO |
1,002 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 140V/µs | 325 MHz | - | 5 µA | 100 µV | 11mA | - | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
AD629ARIC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,194 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Sense | 1 | - | 2.1V/µs | - | 500 kHz | - | 200 µV | 900µA | 25 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
|
AD629AR-REEL7IC OPAMP DIFF 1 CIRCUIT 8SOIC |
4,962 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Obsolete | Current Sense | 1 | - | 2.1V/µs | - | 500 kHz | - | 200 µV | 900µA | 25 mA | 5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD628ARMZ-RLIC CURRENT SENSE 1 CIRCUIT 8MSOP |
4,260 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 0.3V/µs | - | 600 kHz | 1.5 nA | 150 µV | 1.6mA | - | 4.5 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
LT1999HS8-20#TRPBFIC CURRENT SENSE 1 CIRCUIT 8SO |
2,614 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | 3V/µs | - | 2 MHz | 137.5 µA | 500 µV | 5.8mA | - | 4.5 V | 5.5 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
AD548TQIC OPAMP GP 1 CIRCUIT 8CERDIP |
112 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.8V/µs | 1 MHz | - | 10 pA | 750 µV | 170µA | 15 mA | 9 V | 36 V | - | - | - | Through Hole | 8-CERDIP |
|
LTC6102HVIDD#TRPBFIC CURRENT SENSE 1 CIRCUIT 8DFN |
3,290 | - |
|
Datasheet | - | 8-WFDFN Exposed Pad | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | 200 kHz | - | 60 pA | 3 µV | 420µA | 1 mA | 5 V | 100 V | -40°C ~ 85°C | - | - | Surface Mount | 8-DFN (3x3) |
|
AD8643ACPZ-R2IC OPAMP JFET 4 CIRCUIT 16LFCSP |
3,607 | - |
|
Datasheet | - | 16-WFQFN Exposed Pad, CSP | Tape & Reel (TR) | Discontinued at Digi-Key | J-FET | 4 | Rail-to-Rail | 3V/µs | 3.5 MHz | - | 0.25 pA | 70 µV | 200µA (x4 Channels) | 12 mA | 5 V | 26 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP-WQ (3x3) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
