Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
ADA4096-2WARMZ-RLIC OPAMP GP 2 CIRCUIT 8MSOP |
2,900 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 0.4V/µs | 786 kHz | 1.52 MHz | 3 nA | 35 µV | 60µA (x2 Channels) | 10 mA | 3 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 8-MSOP |
|
OP484FPIC OPAMP GP R-R 4.25MHZ LN 14DIP |
608 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 4V/µs | 4.25 MHz | - | 80 nA | 250 µV | - | 10 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Through Hole | 14-PDIP |
|
OP184ESZ-REELIC OPAMP GP 1 CIRCUIT 8SOIC |
1,137 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | Rail-to-Rail | 4V/µs | 4.25 MHz | - | 80 nA | 100 µV | 2.25mA | 10 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SOIC |
|
|
OP90GSZ-REELIC OPAMP GP 1 CIRCUIT 8SOIC |
3,227 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 1 | - | 0.012V/µs | - | - | 4 nA | 125 µV | 14µA | 5 mA | 1.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
AD8036ARIC VOLTAGE FEEDBACK 1 CIRC 8SOIC |
40,905 | - |
|
Datasheet | CLAMPIN™ | 8-SOIC (0.154", 3.90mm Width) | Bulk | Obsolete | Voltage Feedback | 1 | - | 1200V/µs | - | 240 MHz | 4 µA | 2 mV | 20.5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
|
OP05ZIC INST AMP 1 CIRCUIT 8CERDIP |
823 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Instrumentation | 1 | - | 0.3V/µs | - | - | 1 nA | 200 µV | - | - | 6 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
PM356JIC OPAMP JFET 1 CIRCUIT TO99 |
314 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 12V/µs | 4.5 MHz | - | 30 nA | 1 mV | 5mA | - | 44 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | TO-99 |
|
|
LT1168ACS8#TRPBFIC INST AMP 1 CIRCUIT 8SO |
4,087 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.5V/µs | 400 kHz | - | 40 pA | 15 µV | 350µA | 32 mA | 4.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
LTC6911IMS-1#TRPBFIC OPAMP PGA 2 CIRCUIT 10MSOP |
1,755 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | Programmable Gain | 2 | Rail-to-Rail | 16V/µs | 11 MHz | - | - | 2 mV | 3.1mA (x2 Channels) | 35 mA | 2.7 V | 10.5 V | -40°C ~ 85°C | - | - | Surface Mount | 10-MSOP |
|
LT1674IS#PBFIC OPAMP GP 4 CIRCUIT 14SO |
4,993 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 4 | Rail-to-Rail | 0.005V/µs | 12 kHz | - | 25 pA | 200 µV | 1.9µA (x4 Channels) | 1.5 mA | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
