Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD518KN/+IC OPAMP GP 1 CIRCUIT 8DIP |
1,252 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 70V/µs | 12 MHz | - | 120 nA | 2 mV | 5µA | 10 mA | - | - | -55°C ~ 125°C | - | - | Through Hole | 8-PDIP |
|
AD713JR-16-REELIC OPAMP JFET 4 CIRCUIT 16SOIC |
3,807 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 20V/µs | - | 4 MHz | 10 pA | 300 µV | 10mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
PM1008AZIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,324 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.2V/µs | 500 kHz | - | 40 pA | 40 µV | 380µA | - | 4 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
|
AD713JR-16-REEL7IC OPAMP JFET 4 CIRCUIT 16SOIC |
2,508 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 4 | - | 20V/µs | - | 4 MHz | 10 pA | 300 µV | 10mA | 25 mA | 9 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
OP260GS-REELIC OPAMP CFA 2 CIRCUIT 16SOIC |
400 | - |
|
Datasheet | - | 16-SOIC (0.154", 3.90mm Width) | Bulk | Active | Current Feedback | 2 | - | 550V/µs | - | 90 MHz | 5 µA | 3 mV | 9mA | - | 18 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SOIC |
|
LT1810IMS8#TRPBFIC OPAMP GP 2 CIRCUIT 8MSOP |
3,052 | - |
|
Datasheet | LT® | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tape & Reel (TR) | Active | General Purpose | 2 | Rail-to-Rail | 350V/µs | 180 MHz | 320 MHz | 2 µA | 800 µV | 15mA (x2 Channels) | 85 mA | 2.5 V | 12.6 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
AD744AQIC OPAMP JFET 1 CIRCUIT 8CERDIP |
2,010 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 75V/µs | - | 13 MHz | 30 pA | 300 µV | 3.5mA | 25 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
OP020149ZIC OPAMP GP 1 CIRCUIT 8CERDIP |
300 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | 1.3 MHz | - | 1 nA | 1 mV | - | - | 10 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
AD815ARB-24IC AMP DIFF DUAL LDIST 24SOIC |
37,117 | - |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width), 18 Leads, Fused Leads | Tube | Obsolete | Differential | 2 | Differential | 900V/µs | - | 120 MHz | 10 µA | 5 mV | 23mA | 500 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC w/Batwing |
|
AD711THIC OPAMP JFET 1 CIRCUIT TO99-8 |
626 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 20V/µs | 4 MHz | - | 15 pA | 200 µV | 2.5mA | 25 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
