Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD510JH/+IC OPAMP GP 1 CIRCUIT TO99-8 |
1,495 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | - | - | - | 25 nA | 100 µV | - | - | 10 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
5962-8954303PAIC OPAMP JFET 1 CIRCUIT 8CERDIP |
2,239 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 1 | - | 13V/µs | 6 MHz | - | 15 pA | 200 µV | 2.7mA | - | 44 V | 44 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
ADA4004-4ACPZ-R2IC OPAMP GP 4 CIRCUIT 16LFCSP |
3,430 | - |
|
Datasheet | iPolar® | 16-WQFN Exposed Pad, CSP | Tape & Reel (TR) | Discontinued at Digi-Key | General Purpose | 4 | - | 2.7V/µs | 12 MHz | - | 40 nA | 40 µV | - | 10 mA | 10 V | 30 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP (4x4) |
|
LT1398CS#PBFIC OPAMP CFA 2 CIRCUIT 16SO |
175 | - |
|
Datasheet | LT® | 16-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | Current Feedback | 2 | - | 800V/µs | 300 MHz | 300 MHz | 10 µA | 1.5 mV | 4.6mA (x2 Channels) | 80 mA | 4 V | 12 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
|
OP02DJIC OPAMP GP 1 CIRCUIT TO99 |
228 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | General Purpose | 1 | - | 0.5V/µs | 1.3 MHz | - | 30 nA | 3 mV | - | - | 10 V | 44 V | 0°C ~ 70°C | - | - | Through Hole | TO-99 |
|
LT1787HS8#TRPBFIC CURRENT SENSE 1 CIRCUIT 8SO |
2,856 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Current Sense | 1 | - | - | - | - | - | 40 µV | 60µA | 50 µA | 2.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 8-SO |
|
|
OP44EJIC OPAMP JFET 1 CIRCUIT TO99 |
1,013 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 100V/µs | 23 MHz | - | 80 pA | 300 µV | 6.5mA | - | 16 V | 40 V | -25°C ~ 85°C | - | - | Through Hole | TO-99 |
|
OP27GZIC OPAMP GP 1 CIRCUIT 8DIP |
2,231 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 2.8V/µs | 8 MHz | - | 15 nA | 30 µV | - | - | 8 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LTC6253HMS-7#PBFIC OPAMP GP 2 CIRCUIT 10MSOP |
4,467 | - |
|
Datasheet | - | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 2 | Rail-to-Rail | 500V/µs | 2 GHz | 400 MHz | 1.4 µA | 50 µV | 4.25mA (x2 Channels) | 100 mA | 2.5 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 10-MSOP |
|
|
PM1012AZIC OPAMP GP 1 CIRCUIT 8CERDIP |
209 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 0.2V/µs | 500 kHz | - | 35 pA | 20 µV | 380µA | - | 5 V | 40 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
