Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
OP400GSIC OPAMP GP 4 CIRCUIT 16SOIC |
2,043 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | General Purpose | 4 | Differential | 0.15V/µs | 500 kHz | - | 750 pA | 80 µV | 600µA (x4 Channels) | - | 6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
AD8684ARUZ-REELIC OPAMP JFET 4 CIRCUIT 14TSSOP |
2,239 | - |
|
Datasheet | - | 14-TSSOP (0.173", 4.40mm Width) | Tape & Reel (TR) | Active | J-FET | 4 | - | 9V/µs | 3.5 MHz | - | 6 pA | 350 µV | 210µA (x4 Channels) | 12 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-TSSOP |
|
AD8618ARZ-REELIC CMOS 4 CIRCUIT 14SOIC |
1,852 | - |
|
Datasheet | DigiTrim® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | CMOS | 4 | Rail-to-Rail | 12V/µs | 24 MHz | - | 0.2 pA | 23 µV | 1.7mA (x4 Channels) | 150 mA | 2.7 V | 5 V | -40°C ~ 125°C | - | - | Surface Mount | 14-SOIC |
|
LTC6257IMS#PBFIC OPAMP GP 4 CIRCUIT 16MSOP |
319 | - |
|
Datasheet | - | 16-TFSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 4 | Rail-to-Rail | 1.8V/µs | 6.5 MHz | 4.5 MHz | 5 nA | 100 µV | 65µA (x4 Channels) | 35 mA | 1.8 V | 5.25 V | -40°C ~ 85°C | - | - | Surface Mount | 16-MSOP |
|
OP270GN8#PBFIC OPAMP GP 2 CIRCUIT 8DIP |
2,432 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 2 | - | 3V/µs | 6 MHz | - | 15 nA | 50 µV | 4mA (x2 Channels) | - | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AD642KHIC OPAMP JFET 2 CIRCUIT TO99-8 |
6,127 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 2 | - | 3V/µs | - | 50 kHz | 25 pA | 1 mV | - | 25 mA | 10 V | 10 V | 0°C ~ 70°C | - | - | Through Hole | TO-99-8 |
|
AD815AYIC OPAMP DIFF 2 CIRCUIT 24SOIC |
20,767 | - |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width), 18 Leads, Fused Leads | Bulk | Active | Differential | 2 | Differential | 900V/µs | - | 110 MHz | 10 µA | 500 µV | 30mA | 500 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
|
AD815AVRIC OPAMP DIFF 2 CIRCUIT 24SOIC |
14,368 | - |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width), 18 Leads, Fused Leads | Bulk | Active | Differential | 2 | Differential | 900V/µs | - | 110 MHz | 10 µA | 500 µV | 30mA | 500 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
|
AD815AYSIC OPAMP DIFF 2 CIRCUIT 24SOIC |
614 | - |
|
Datasheet | - | 24-SOIC (0.295", 7.50mm Width), 18 Leads, Fused Leads | Bulk | Active | Differential | 2 | Differential | 900V/µs | - | 120 MHz | 10 µA | 5 mV | 30mA | 500 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 24-SOIC |
|
LT1101SW#TRPBFIC INST AMP 1 CIRCUIT 16SO |
4,802 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 0.1V/µs | 37 kHz | - | 6 nA | 250 µV | 94µA | - | 2.2 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
