Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
AD8001AQIC OPAMP CFA 1 CIRCUIT 8CERDIP |
2,667 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | Current Feedback | 1 | - | 1200V/µs | - | 880 MHz | 5 µA | 2 mV | 5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
AD8674ARZ-REELIC OPAMP GP 4 CIRCUIT 14SOIC |
1,860 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | - | 4V/µs | 10 MHz | - | 3 nA | 20 µV | 3mA (x4 Channels) | 20 mA | 10 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
AD548SQ/883BIC OPAMP GP 1 CIRCUIT 8CERDIP |
1,268 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 1 | - | 1.8V/µs | 1 MHz | - | 10 pA | 750 µV | 170µA | 15 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | 8-CERDIP |
|
LT1463CS#PBFIC OPAMP JFET 4 CIRCUIT 14SO |
4,299 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | J-FET | 4 | - | 0.13V/µs | 175 kHz | - | 1 pA | 600 µV | 28µA (x4 Channels) | 17 mA | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 14-SO |
|
AD745KR-16IC OPAMP JFET 1 CIRCUIT 16SOIC |
2,914 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Obsolete | J-FET | 1 | - | 12.5V/µs | 20 MHz | 20 MHz | 150 pA | 100 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
AD745KR-16-REEL7IC OPAMP JFET 1 CIRCUIT 16SOIC |
4,675 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 1 | - | 12.5V/µs | 20 MHz | 20 MHz | 150 pA | 100 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
|
OP14Z/883CIC OPAMP GP 2 CIRCUIT 8CERDIP |
2,702 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | General Purpose | 2 | - | 0.5V/µs | 1.3 MHz | - | 20 nA | 1 mV | - | - | 44 V | 44 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
|
LT1491AIS#TRPBFIC OPAMP GP 4 CIRCUIT 14SO |
1,632 | - |
|
Datasheet | LT® | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.06V/µs | 200 kHz | - | 1 nA | 285 µV | 50µA (x4 Channels) | 25 mA | 2 V | 44 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SO |
|
LTC6248HMS#PBFIC OPAMP GP 4 CIRCUIT 16MSOP |
4,367 | - |
|
Datasheet | - | 16-TFSOP (0.118", 3.00mm Width) | Tube | Last Time Buy | General Purpose | 4 | Rail-to-Rail | 90V/µs | 180 MHz | 120 MHz | 400 nA | 100 µV | 1.25mA (x4 Channels) | 100 mA | 2.5 V | 5.25 V | -40°C ~ 125°C | - | - | Surface Mount | 16-MSOP |
|
AD8225ARZ-R7IC INST AMP 1 CIRCUIT 8SOIC |
2,515 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 5V/µs | - | 900 kHz | 500 pA | 50 µV | 1.05mA | 18 mA | 3.4 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SOIC |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
