Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1167AIS8#TRPBFIC INST AMP 1 CIRCUIT 8SO |
3,403 | - |
|
Datasheet | - | 8-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | Instrumentation | 1 | - | 1.2V/µs | 1 MHz | - | 50 pA | 15 µV | 900µA | 27 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 8-SO |
|
|
LT1219CS8#PBFIC OPAMP GP 1 CIRCUIT 8SO |
3,662 | - |
|
Datasheet | C-Load™ | 8-SOIC (0.154", 3.90mm Width) | Tube | Obsolete | General Purpose | 1 | Rail-to-Rail | 0.05V/µs | 150 kHz | - | 30 nA | 85 µV | 425µA | 20 mA | 2 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 8-SO |
|
AD845JNIC OPAMP JFET 1 CIRCUIT 8DIP |
3,104 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Obsolete | J-FET | 1 | - | 100V/µs | 16 MHz | - | 750 pA | 700 µV | 10mA | 50 mA | 9.5 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
AD744CHIC OPAMP JFET 1 CIRCUIT TO99-8 |
857 | - |
|
Datasheet | - | TO-99-8 Metal Can | Bulk | Active | J-FET | 1 | - | 75V/µs | 13 MHz | 13 MHz | 30 pA | 250 µV | 3.5mA | 25 mA | 9 V | 36 V | -55°C ~ 125°C | - | - | Through Hole | TO-99-8 |
|
OP249FZIC OPAMP JFET 2 CIRCUIT 8CERDIP |
3,531 | - |
|
Datasheet | - | 8-CDIP (0.300", 7.62mm) | Bulk | Active | J-FET | 2 | - | 22V/µs | 4.7 MHz | - | 30 pA | 200 µV | 5.6mA | 36 mA | 9 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-CERDIP |
|
OP747ARZ-REELIC OPAMP GP 4 CIRCUIT 14SOIC |
3,344 | - |
|
Datasheet | - | 14-SOIC (0.154", 3.90mm Width) | Tape & Reel (TR) | Active | General Purpose | 4 | Rail-to-Rail | 0.2V/µs | 700 kHz | - | 5 nA | 30 µV | 320µA (x4 Channels) | 30 mA | 2.7 V | 30 V | -40°C ~ 85°C | - | - | Surface Mount | 14-SOIC |
|
OP497FPIC OPAMP GP 500KHZ QUAD 14DIP |
400 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Obsolete | General Purpose | 4 | - | 0.15V/µs | 500 kHz | - | 40 pA | 40 µV | 525µA (x4 Channels) | 25 mA | 4 V | 40 V | -40°C ~ 85°C | - | - | Through Hole | 14-PDIP |
|
AD745KR-16-REELIC OPAMP JFET 1 CIRCUIT 16SOIC |
4,645 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tape & Reel (TR) | Obsolete | J-FET | 1 | - | 12.5V/µs | 20 MHz | 20 MHz | 150 pA | 100 µV | 8mA | 40 mA | 9.6 V | 36 V | 0°C ~ 70°C | - | - | Surface Mount | 16-SOIC |
|
ADN2891ACPZ-RL7IC LIMITING 1 CIRCUIT 16LFCSP |
2,410 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Limiting | 1 | Differential | - | - | - | - | 100 µV | 45mA | - | 2.9 V | 3.6 V | -40°C ~ 95°C | - | - | Surface Mount | 16-LFCSP-VQ (3x3) |
|
|
ADN2892ACPZ-RL7IC LIMITING 1 CIRCUIT 16LFCSP |
1,348 | - |
|
Datasheet | - | 16-VFQFN Exposed Pad, CSP | Tape & Reel (TR) | Active | Limiting | 1 | Differential | - | - | 1.5 GHz | - | 100 µV | 48mA | - | 2.9 V | 3.6 V | -40°C ~ 95°C | - | - | Surface Mount | 16-LFCSP-VQ (3x3) |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
