Instrumentation, Op Amps, Buffer Amps
Use the filters and product table below to compare Instrumentation, Op Amps, Buffer Amps components by manufacturer, availability, pricing reference and technical specifications. Review datasheets and key parameters to narrow the selection for your application.
If you already have a target part number, package, rating or quantity, send the requirement to Winsun (HK) Electronics for availability checks, BOM sourcing, shortage support and quotation assistance.
| Photo | Mfr. Part # | Availability | Price | Quantity | Datasheet | Series | Package/Case | Packaging | Product Status | Amplifier Type | Number of Circuits | Output Type | Slew Rate | Gain Bandwidth Product | -3db Bandwidth | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temperature | Grade | Qualification | Mounting Type | Supplier Device Package |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LT1167IN8#PBFIC INST AMP 1 CIRCUIT 8DIP |
2,053 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | - | 1.2V/µs | 1 MHz | - | 80 pA | 20 µV | 900µA | 27 mA | 4.6 V | 36 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
AD623BNZIC INST AMP 1 CIRCUIT 8DIP |
4,095 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Instrumentation | 1 | Rail-to-Rail | 0.3V/µs | - | 800 kHz | 17 nA | 25 µV | 375µA | - | 2.7 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
LTC1992-10IMS8#PBFIC OPAMP DIFF 1 CIRCUIT 8MSOP |
4,107 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Differential | 1 | Differential, Rail-to-Rail | 1.5V/µs | 3.2 MHz | - | 2 pA | 250 µV | 700µA | 30 mA | 2.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
|
LTC1992-2IMS8#PBFIC OPAMP DIFF 1 CIRCUIT 8MSOP |
4,020 | - |
|
Datasheet | - | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Tube | Active | Differential | 1 | Differential, Rail-to-Rail | 1.5V/µs | 3.2 MHz | - | 2 pA | 250 µV | 700µA | 30 mA | 2.7 V | 11 V | -40°C ~ 85°C | - | - | Surface Mount | 8-MSOP |
|
LT1795CSW#PBFIC OPAMP CFA 2 CIRCUIT 20SO |
2,571 | - |
|
Datasheet | LT® | 20-SOIC (0.295", 7.50mm Width) | Tube | Active | Current Feedback | 2 | - | 900V/µs | - | 65 MHz | 10 µA | 3 mV | 29mA (x2 Channels) | 1 A | 10 V | 30 V | 0°C ~ 70°C | - | - | Surface Mount | 20-SO |
|
OP484FPZIC OPAMP GP 4 CIRCUIT 14DIP |
3,158 | - |
|
Datasheet | - | 14-DIP (0.300", 7.62mm) | Tube | Active | General Purpose | 4 | Rail-to-Rail | 4V/µs | 4.25 MHz | - | 80 nA | 250 µV | - | 10 mA | 3 V | 36 V | -40°C ~ 125°C | - | - | Through Hole | 14-PDIP |
|
AD8224HBCPZ-WPIC INST AMP 2 CIRCUIT 16LFCSP |
4,639 | - |
|
Datasheet | - | 16-VQFN, CSP | Tray | Active | Instrumentation | 2 | Rail-to-Rail | 2V/µs | - | 1.5 MHz | 10 pA | 175 µV | 750µA (x2 Channels) | 15 mA | 4.5 V | 36 V | -40°C ~ 125°C | - | - | Surface Mount | 16-LFCSP-VQ (4x4) |
|
|
AD8001ANZIC OPAMP CFA 1 CIRCUIT 8DIP |
2,878 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | Current Feedback | 1 | - | 1200V/µs | - | 880 MHz | 5 µA | 2 mV | 5mA | 70 mA | 6 V | 12 V | -40°C ~ 85°C | - | - | Through Hole | 8-PDIP |
|
|
AD845JNZIC OPAMP JFET 1 CIRCUIT 8DIP |
2,313 | - |
|
Datasheet | - | 8-DIP (0.300", 7.62mm) | Tube | Active | J-FET | 1 | - | 100V/µs | 16 MHz | - | 750 pA | 700 µV | 10mA | 50 mA | 9.5 V | 36 V | 0°C ~ 70°C | - | - | Through Hole | 8-PDIP |
|
LT1101ISW#PBFIC INST AMP 1 CIRCUIT 16SO |
3,875 | - |
|
Datasheet | - | 16-SOIC (0.295", 7.50mm Width) | Tube | Active | Instrumentation | 1 | - | 0.1V/µs | 37 kHz | - | 6 nA | 250 µV | 94µA | - | 2.2 V | 36 V | -40°C ~ 85°C | - | - | Surface Mount | 16-SO |
Instrumentation, Op Amps, Buffer Amps FAQ
Common questions about filtering, comparing and sourcing Instrumentation, Op Amps, Buffer Amps components.
How can I narrow the Instrumentation, Op Amps, Buffer Amps selection?
Use the available manufacturer and technical parameter filters to reduce the product list. Compare the remaining part numbers against your electrical, package and application requirements.
Should I confirm the datasheet before selecting a part?
Yes. Always review the manufacturer datasheet to confirm ratings, package, operating conditions and other technical details before finalizing a component for your design.
Can Winsun (HK) Electronics help source a specific Instrumentation, Op Amps, Buffer Amps part number?
Yes. Send the exact manufacturer part number and required quantity for availability, lead-time and quotation support.
Do you support BOM, shortage or alternative-part requirements?
Yes. You can submit a BOM or shortage list for sourcing assistance. Where appropriate, our team can also help review possible alternative-part options.
